From: Jean-Philippe Orsini Date: Mon, 22 Apr 2013 07:11:02 +0000 (+0000) Subject: (no commit message) X-Git-Url: https://git.wpitchoune.net/gitweb/?p=prss.git;a=commitdiff_plain;h=f6f47b24f243731a2c51e420ff6fb8e69f01df28 --- diff --git a/INSTALL b/INSTALL new file mode 100644 index 0000000..a1e89e1 --- /dev/null +++ b/INSTALL @@ -0,0 +1,370 @@ +Installation Instructions +************************* + +Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation, +Inc. + + Copying and distribution of this file, with or without modification, +are permitted in any medium without royalty provided the copyright +notice and this notice are preserved. This file is offered as-is, +without warranty of any kind. + +Basic Installation +================== + + Briefly, the shell commands `./configure; make; make install' should +configure, build, and install this package. The following +more-detailed instructions are generic; see the `README' file for +instructions specific to this package. Some packages provide this +`INSTALL' file but do not implement all of the features documented +below. The lack of an optional feature in a given package is not +necessarily a bug. More recommendations for GNU packages can be found +in *note Makefile Conventions: (standards)Makefile Conventions. + + The `configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation. It uses +those values to create a `Makefile' in each directory of the package. +It may also create one or more `.h' files containing system-dependent +definitions. Finally, it creates a shell script `config.status' that +you can run in the future to recreate the current configuration, and a +file `config.log' containing compiler output (useful mainly for +debugging `configure'). + + It can also use an optional file (typically called `config.cache' +and enabled with `--cache-file=config.cache' or simply `-C') that saves +the results of its tests to speed up reconfiguring. Caching is +disabled by default to prevent problems with accidental use of stale +cache files. + + If you need to do unusual things to compile the package, please try +to figure out how `configure' could check whether to do them, and mail +diffs or instructions to the address given in the `README' so they can +be considered for the next release. If you are using the cache, and at +some point `config.cache' contains results you don't want to keep, you +may remove or edit it. + + The file `configure.ac' (or `configure.in') is used to create +`configure' by a program called `autoconf'. You need `configure.ac' if +you want to change it or regenerate `configure' using a newer version +of `autoconf'. + + The simplest way to compile this package is: + + 1. `cd' to the directory containing the package's source code and type + `./configure' to configure the package for your system. + + Running `configure' might take a while. While running, it prints + some messages telling which features it is checking for. + + 2. Type `make' to compile the package. + + 3. Optionally, type `make check' to run any self-tests that come with + the package, generally using the just-built uninstalled binaries. + + 4. Type `make install' to install the programs and any data files and + documentation. When installing into a prefix owned by root, it is + recommended that the package be configured and built as a regular + user, and only the `make install' phase executed with root + privileges. + + 5. Optionally, type `make installcheck' to repeat any self-tests, but + this time using the binaries in their final installed location. + This target does not install anything. Running this target as a + regular user, particularly if the prior `make install' required + root privileges, verifies that the installation completed + correctly. + + 6. You can remove the program binaries and object files from the + source code directory by typing `make clean'. To also remove the + files that `configure' created (so you can compile the package for + a different kind of computer), type `make distclean'. There is + also a `make maintainer-clean' target, but that is intended mainly + for the package's developers. If you use it, you may have to get + all sorts of other programs in order to regenerate files that came + with the distribution. + + 7. Often, you can also type `make uninstall' to remove the installed + files again. In practice, not all packages have tested that + uninstallation works correctly, even though it is required by the + GNU Coding Standards. + + 8. Some packages, particularly those that use Automake, provide `make + distcheck', which can by used by developers to test that all other + targets like `make install' and `make uninstall' work correctly. + This target is generally not run by end users. + +Compilers and Options +===================== + + Some systems require unusual options for compilation or linking that +the `configure' script does not know about. Run `./configure --help' +for details on some of the pertinent environment variables. + + You can give `configure' initial values for configuration parameters +by setting variables in the command line or in the environment. Here +is an example: + + ./configure CC=c99 CFLAGS=-g LIBS=-lposix + + *Note Defining Variables::, for more details. + +Compiling For Multiple Architectures +==================================== + + You can compile the package for more than one kind of computer at the +same time, by placing the object files for each architecture in their +own directory. To do this, you can use GNU `make'. `cd' to the +directory where you want the object files and executables to go and run +the `configure' script. `configure' automatically checks for the +source code in the directory that `configure' is in and in `..'. This +is known as a "VPATH" build. + + With a non-GNU `make', it is safer to compile the package for one +architecture at a time in the source code directory. After you have +installed the package for one architecture, use `make distclean' before +reconfiguring for another architecture. + + On MacOS X 10.5 and later systems, you can create libraries and +executables that work on multiple system types--known as "fat" or +"universal" binaries--by specifying multiple `-arch' options to the +compiler but only a single `-arch' option to the preprocessor. Like +this: + + ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CPP="gcc -E" CXXCPP="g++ -E" + + This is not guaranteed to produce working output in all cases, you +may have to build one architecture at a time and combine the results +using the `lipo' tool if you have problems. + +Installation Names +================== + + By default, `make install' installs the package's commands under +`/usr/local/bin', include files under `/usr/local/include', etc. You +can specify an installation prefix other than `/usr/local' by giving +`configure' the option `--prefix=PREFIX', where PREFIX must be an +absolute file name. + + You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. If you +pass the option `--exec-prefix=PREFIX' to `configure', the package uses +PREFIX as the prefix for installing programs and libraries. +Documentation and other data files still use the regular prefix. + + In addition, if you use an unusual directory layout you can give +options like `--bindir=DIR' to specify different values for particular +kinds of files. Run `configure --help' for a list of the directories +you can set and what kinds of files go in them. In general, the +default for these options is expressed in terms of `${prefix}', so that +specifying just `--prefix' will affect all of the other directory +specifications that were not explicitly provided. + + The most portable way to affect installation locations is to pass the +correct locations to `configure'; however, many packages provide one or +both of the following shortcuts of passing variable assignments to the +`make install' command line to change installation locations without +having to reconfigure or recompile. + + The first method involves providing an override variable for each +affected directory. For example, `make install +prefix=/alternate/directory' will choose an alternate location for all +directory configuration variables that were expressed in terms of +`${prefix}'. Any directories that were specified during `configure', +but not in terms of `${prefix}', must each be overridden at install +time for the entire installation to be relocated. The approach of +makefile variable overrides for each directory variable is required by +the GNU Coding Standards, and ideally causes no recompilation. +However, some platforms have known limitations with the semantics of +shared libraries that end up requiring recompilation when using this +method, particularly noticeable in packages that use GNU Libtool. + + The second method involves providing the `DESTDIR' variable. For +example, `make install DESTDIR=/alternate/directory' will prepend +`/alternate/directory' before all installation names. The approach of +`DESTDIR' overrides is not required by the GNU Coding Standards, and +does not work on platforms that have drive letters. On the other hand, +it does better at avoiding recompilation issues, and works well even +when some directory options were not specified in terms of `${prefix}' +at `configure' time. + +Optional Features +================= + + If the package supports it, you can cause programs to be installed +with an extra prefix or suffix on their names by giving `configure' the +option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. + + Some packages pay attention to `--enable-FEATURE' options to +`configure', where FEATURE indicates an optional part of the package. +They may also pay attention to `--with-PACKAGE' options, where PACKAGE +is something like `gnu-as' or `x' (for the X Window System). The +`README' should mention any `--enable-' and `--with-' options that the +package recognizes. + + For packages that use the X Window System, `configure' can usually +find the X include and library files automatically, but if it doesn't, +you can use the `configure' options `--x-includes=DIR' and +`--x-libraries=DIR' to specify their locations. + + Some packages offer the ability to configure how verbose the +execution of `make' will be. For these packages, running `./configure +--enable-silent-rules' sets the default to minimal output, which can be +overridden with `make V=1'; while running `./configure +--disable-silent-rules' sets the default to verbose, which can be +overridden with `make V=0'. + +Particular systems +================== + + On HP-UX, the default C compiler is not ANSI C compatible. If GNU +CC is not installed, it is recommended to use the following options in +order to use an ANSI C compiler: + + ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" + +and if that doesn't work, install pre-built binaries of GCC for HP-UX. + + HP-UX `make' updates targets which have the same time stamps as +their prerequisites, which makes it generally unusable when shipped +generated files such as `configure' are involved. Use GNU `make' +instead. + + On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot +parse its `' header file. The option `-nodtk' can be used as +a workaround. If GNU CC is not installed, it is therefore recommended +to try + + ./configure CC="cc" + +and if that doesn't work, try + + ./configure CC="cc -nodtk" + + On Solaris, don't put `/usr/ucb' early in your `PATH'. This +directory contains several dysfunctional programs; working variants of +these programs are available in `/usr/bin'. So, if you need `/usr/ucb' +in your `PATH', put it _after_ `/usr/bin'. + + On Haiku, software installed for all users goes in `/boot/common', +not `/usr/local'. It is recommended to use the following options: + + ./configure --prefix=/boot/common + +Specifying the System Type +========================== + + There may be some features `configure' cannot figure out +automatically, but needs to determine by the type of machine the package +will run on. Usually, assuming the package is built to be run on the +_same_ architectures, `configure' can figure that out, but if it prints +a message saying it cannot guess the machine type, give it the +`--build=TYPE' option. TYPE can either be a short name for the system +type, such as `sun4', or a canonical name which has the form: + + CPU-COMPANY-SYSTEM + +where SYSTEM can have one of these forms: + + OS + KERNEL-OS + + See the file `config.sub' for the possible values of each field. If +`config.sub' isn't included in this package, then this package doesn't +need to know the machine type. + + If you are _building_ compiler tools for cross-compiling, you should +use the option `--target=TYPE' to select the type of system they will +produce code for. + + If you want to _use_ a cross compiler, that generates code for a +platform different from the build platform, you should specify the +"host" platform (i.e., that on which the generated programs will +eventually be run) with `--host=TYPE'. + +Sharing Defaults +================ + + If you want to set default values for `configure' scripts to share, +you can create a site shell script called `config.site' that gives +default values for variables like `CC', `cache_file', and `prefix'. +`configure' looks for `PREFIX/share/config.site' if it exists, then +`PREFIX/etc/config.site' if it exists. Or, you can set the +`CONFIG_SITE' environment variable to the location of the site script. +A warning: not all `configure' scripts look for a site script. + +Defining Variables +================== + + Variables not defined in a site shell script can be set in the +environment passed to `configure'. However, some packages may run +configure again during the build, and the customized values of these +variables may be lost. In order to avoid this problem, you should set +them in the `configure' command line, using `VAR=value'. For example: + + ./configure CC=/usr/local2/bin/gcc + +causes the specified `gcc' to be used as the C compiler (unless it is +overridden in the site shell script). + +Unfortunately, this technique does not work for `CONFIG_SHELL' due to +an Autoconf bug. Until the bug is fixed you can use this workaround: + + CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash + +`configure' Invocation +====================== + + `configure' recognizes the following options to control how it +operates. + +`--help' +`-h' + Print a summary of all of the options to `configure', and exit. + +`--help=short' +`--help=recursive' + Print a summary of the options unique to this package's + `configure', and exit. The `short' variant lists options used + only in the top level, while the `recursive' variant lists options + also present in any nested packages. + +`--version' +`-V' + Print the version of Autoconf used to generate the `configure' + script, and exit. + +`--cache-file=FILE' + Enable the cache: use and save the results of the tests in FILE, + traditionally `config.cache'. FILE defaults to `/dev/null' to + disable caching. + +`--config-cache' +`-C' + Alias for `--cache-file=config.cache'. + +`--quiet' +`--silent' +`-q' + Do not print messages saying which checks are being made. To + suppress all normal output, redirect it to `/dev/null' (any error + messages will still be shown). + +`--srcdir=DIR' + Look for the package's source code in directory DIR. Usually + `configure' can determine that directory automatically. + +`--prefix=DIR' + Use DIR as the installation prefix. *note Installation Names:: + for more details, including other options available for fine-tuning + the installation locations. + +`--no-create' +`-n' + Run the configure checks, but stop before creating any output + files. + +`configure' also accepts some other, not widely useful, options. Run +`configure --help' for more details. + diff --git a/compile b/compile new file mode 100755 index 0000000..862a14e --- /dev/null +++ b/compile @@ -0,0 +1,343 @@ +#! /bin/sh +# Wrapper for compilers which do not understand '-c -o'. + +scriptversion=2012-03-05.13; # UTC + +# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2009, 2010, 2012 Free +# Software Foundation, Inc. +# Written by Tom Tromey . +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# This file is maintained in Automake, please report +# bugs to or send patches to +# . + +nl=' +' + +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent tools from complaining about whitespace usage. +IFS=" "" $nl" + +file_conv= + +# func_file_conv build_file lazy +# Convert a $build file to $host form and store it in $file +# Currently only supports Windows hosts. If the determined conversion +# type is listed in (the comma separated) LAZY, no conversion will +# take place. +func_file_conv () +{ + file=$1 + case $file in + / | /[!/]*) # absolute file, and not a UNC file + if test -z "$file_conv"; then + # lazily determine how to convert abs files + case `uname -s` in + MINGW*) + file_conv=mingw + ;; + CYGWIN*) + file_conv=cygwin + ;; + *) + file_conv=wine + ;; + esac + fi + case $file_conv/,$2, in + *,$file_conv,*) + ;; + mingw/*) + file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'` + ;; + cygwin/*) + file=`cygpath -m "$file" || echo "$file"` + ;; + wine/*) + file=`winepath -w "$file" || echo "$file"` + ;; + esac + ;; + esac +} + +# func_cl_dashL linkdir +# Make cl look for libraries in LINKDIR +func_cl_dashL () +{ + func_file_conv "$1" + if test -z "$lib_path"; then + lib_path=$file + else + lib_path="$lib_path;$file" + fi + linker_opts="$linker_opts -LIBPATH:$file" +} + +# func_cl_dashl library +# Do a library search-path lookup for cl +func_cl_dashl () +{ + lib=$1 + found=no + save_IFS=$IFS + IFS=';' + for dir in $lib_path $LIB + do + IFS=$save_IFS + if $shared && test -f "$dir/$lib.dll.lib"; then + found=yes + lib=$dir/$lib.dll.lib + break + fi + if test -f "$dir/$lib.lib"; then + found=yes + lib=$dir/$lib.lib + break + fi + done + IFS=$save_IFS + + if test "$found" != yes; then + lib=$lib.lib + fi +} + +# func_cl_wrapper cl arg... +# Adjust compile command to suit cl +func_cl_wrapper () +{ + # Assume a capable shell + lib_path= + shared=: + linker_opts= + for arg + do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + eat=1 + case $2 in + *.o | *.[oO][bB][jJ]) + func_file_conv "$2" + set x "$@" -Fo"$file" + shift + ;; + *) + func_file_conv "$2" + set x "$@" -Fe"$file" + shift + ;; + esac + ;; + -I) + eat=1 + func_file_conv "$2" mingw + set x "$@" -I"$file" + shift + ;; + -I*) + func_file_conv "${1#-I}" mingw + set x "$@" -I"$file" + shift + ;; + -l) + eat=1 + func_cl_dashl "$2" + set x "$@" "$lib" + shift + ;; + -l*) + func_cl_dashl "${1#-l}" + set x "$@" "$lib" + shift + ;; + -L) + eat=1 + func_cl_dashL "$2" + ;; + -L*) + func_cl_dashL "${1#-L}" + ;; + -static) + shared=false + ;; + -Wl,*) + arg=${1#-Wl,} + save_ifs="$IFS"; IFS=',' + for flag in $arg; do + IFS="$save_ifs" + linker_opts="$linker_opts $flag" + done + IFS="$save_ifs" + ;; + -Xlinker) + eat=1 + linker_opts="$linker_opts $2" + ;; + -*) + set x "$@" "$1" + shift + ;; + *.cc | *.CC | *.cxx | *.CXX | *.[cC]++) + func_file_conv "$1" + set x "$@" -Tp"$file" + shift + ;; + *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO]) + func_file_conv "$1" mingw + set x "$@" "$file" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift + done + if test -n "$linker_opts"; then + linker_opts="-link$linker_opts" + fi + exec "$@" $linker_opts + exit 1 +} + +eat= + +case $1 in + '') + echo "$0: No command. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: compile [--help] [--version] PROGRAM [ARGS] + +Wrapper for compilers which do not understand '-c -o'. +Remove '-o dest.o' from ARGS, run PROGRAM with the remaining +arguments, and rename the output as expected. + +If you are trying to build a whole package this is not the +right script to run: please start by reading the file 'INSTALL'. + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "compile $scriptversion" + exit $? + ;; + cl | *[/\\]cl | cl.exe | *[/\\]cl.exe ) + func_cl_wrapper "$@" # Doesn't return... + ;; +esac + +ofile= +cfile= + +for arg +do + if test -n "$eat"; then + eat= + else + case $1 in + -o) + # configure might choose to run compile as 'compile cc -o foo foo.c'. + # So we strip '-o arg' only if arg is an object. + eat=1 + case $2 in + *.o | *.obj) + ofile=$2 + ;; + *) + set x "$@" -o "$2" + shift + ;; + esac + ;; + *.c) + cfile=$1 + set x "$@" "$1" + shift + ;; + *) + set x "$@" "$1" + shift + ;; + esac + fi + shift +done + +if test -z "$ofile" || test -z "$cfile"; then + # If no '-o' option was seen then we might have been invoked from a + # pattern rule where we don't need one. That is ok -- this is a + # normal compilation that the losing compiler can handle. If no + # '.c' file was seen then we are probably linking. That is also + # ok. + exec "$@" +fi + +# Name of file we expect compiler to create. +cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'` + +# Create the lock directory. +# Note: use '[/\\:.-]' here to ensure that we don't use the same name +# that we are using for the .o file. Also, base the name on the expected +# object file name, since that is what matters with a parallel build. +lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d +while true; do + if mkdir "$lockdir" >/dev/null 2>&1; then + break + fi + sleep 1 +done +# FIXME: race condition here if user kills between mkdir and trap. +trap "rmdir '$lockdir'; exit 1" 1 2 15 + +# Run the compile. +"$@" +ret=$? + +if test -f "$cofile"; then + test "$cofile" = "$ofile" || mv "$cofile" "$ofile" +elif test -f "${cofile}bj"; then + test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile" +fi + +rmdir "$lockdir" +exit $ret + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/depcomp b/depcomp new file mode 100755 index 0000000..25a39e6 --- /dev/null +++ b/depcomp @@ -0,0 +1,708 @@ +#! /bin/sh +# depcomp - compile a program generating dependencies as side-effects + +scriptversion=2012-03-27.16; # UTC + +# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010, +# 2011, 2012 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Alexandre Oliva . + +case $1 in + '') + echo "$0: No command. Try '$0 --help' for more information." 1>&2 + exit 1; + ;; + -h | --h*) + cat <<\EOF +Usage: depcomp [--help] [--version] PROGRAM [ARGS] + +Run PROGRAMS ARGS to compile a file, generating dependencies +as side-effects. + +Environment variables: + depmode Dependency tracking mode. + source Source file read by 'PROGRAMS ARGS'. + object Object file output by 'PROGRAMS ARGS'. + DEPDIR directory where to store dependencies. + depfile Dependency file to output. + tmpdepfile Temporary file to use when outputting dependencies. + libtool Whether libtool is used (yes/no). + +Report bugs to . +EOF + exit $? + ;; + -v | --v*) + echo "depcomp $scriptversion" + exit $? + ;; +esac + +# A tabulation character. +tab=' ' +# A newline character. +nl=' +' + +if test -z "$depmode" || test -z "$source" || test -z "$object"; then + echo "depcomp: Variables source, object and depmode must be set" 1>&2 + exit 1 +fi + +# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. +depfile=${depfile-`echo "$object" | + sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} +tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} + +rm -f "$tmpdepfile" + +# Some modes work just like other modes, but use different flags. We +# parameterize here, but still list the modes in the big case below, +# to make depend.m4 easier to write. Note that we *cannot* use a case +# here, because this file can only contain one case statement. +if test "$depmode" = hp; then + # HP compiler uses -M and no extra arg. + gccflag=-M + depmode=gcc +fi + +if test "$depmode" = dashXmstdout; then + # This is just like dashmstdout with a different argument. + dashmflag=-xM + depmode=dashmstdout +fi + +cygpath_u="cygpath -u -f -" +if test "$depmode" = msvcmsys; then + # This is just like msvisualcpp but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u='sed s,\\\\,/,g' + depmode=msvisualcpp +fi + +if test "$depmode" = msvc7msys; then + # This is just like msvc7 but w/o cygpath translation. + # Just convert the backslash-escaped backslashes to single forward + # slashes to satisfy depend.m4 + cygpath_u='sed s,\\\\,/,g' + depmode=msvc7 +fi + +if test "$depmode" = xlc; then + # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency informations. + gccflag=-qmakedep=gcc,-MF + depmode=gcc +fi + +case "$depmode" in +gcc3) +## gcc 3 implements dependency tracking that does exactly what +## we want. Yay! Note: for some reason libtool 1.4 doesn't like +## it if -MD -MP comes after the -MF stuff. Hmm. +## Unfortunately, FreeBSD c89 acceptance of flags depends upon +## the command line argument order; so add the flags where they +## appear in depend2.am. Note that the slowdown incurred here +## affects only configure: in makefiles, %FASTDEP% shortcuts this. + for arg + do + case $arg in + -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;; + *) set fnord "$@" "$arg" ;; + esac + shift # fnord + shift # $arg + done + "$@" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + mv "$tmpdepfile" "$depfile" + ;; + +gcc) +## There are various ways to get dependency output from gcc. Here's +## why we pick this rather obscure method: +## - Don't want to use -MD because we'd like the dependencies to end +## up in a subdir. Having to rename by hand is ugly. +## (We might end up doing this anyway to support other compilers.) +## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like +## -MM, not -M (despite what the docs say). +## - Using -M directly means running the compiler twice (even worse +## than renaming). + if test -z "$gccflag"; then + gccflag=-MD, + fi + "$@" -Wp,"$gccflag$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz +## The second -e expression handles DOS-style file names with drive letters. + sed -e 's/^[^:]*: / /' \ + -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" +## This next piece of magic avoids the "deleted header file" problem. +## The problem is that when a header file which appears in a .P file +## is deleted, the dependency causes make to die (because there is +## typically no way to rebuild the header). We avoid this by adding +## dummy dependencies for each header file. Too bad gcc doesn't do +## this for us directly. + tr ' ' "$nl" < "$tmpdepfile" | +## Some versions of gcc put a space before the ':'. On the theory +## that the space means something, we add a space to the output as +## well. hp depmode also adds that space, but also prefixes the VPATH +## to the object. Take care to not repeat it in the output. +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \ + | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +sgi) + if test "$libtool" = yes; then + "$@" "-Wp,-MDupdate,$tmpdepfile" + else + "$@" -MDupdate "$tmpdepfile" + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + + if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files + echo "$object : \\" > "$depfile" + + # Clip off the initial element (the dependent). Don't try to be + # clever and replace this with sed code, as IRIX sed won't handle + # lines with more than a fixed number of characters (4096 in + # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; + # the IRIX cc adds comments like '#:fec' to the end of the + # dependency line. + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ + tr "$nl" ' ' >> "$depfile" + echo >> "$depfile" + + # The second pass generates a dummy entry for each header file. + tr ' ' "$nl" < "$tmpdepfile" \ + | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ + >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +xlc) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +aix) + # The C for AIX Compiler uses -M and outputs the dependencies + # in a .u file. In older versions, this file always lives in the + # current directory. Also, the AIX compiler puts '$object:' at the + # start of each line; $object doesn't have directory information. + # Version 6 uses the directory in both cases. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.u + tmpdepfile2=$base.u + tmpdepfile3=$dir.libs/$base.u + "$@" -Wc,-M + else + tmpdepfile1=$dir$base.u + tmpdepfile2=$dir$base.u + tmpdepfile3=$dir$base.u + "$@" -M + fi + stat=$? + + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + # Each line is of the form 'foo.o: dependent.h'. + # Do two passes, one to just change these to + # '$object: dependent.h' and one to simply 'dependent.h:'. + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + # The sourcefile does not contain any dependencies, so just + # store a dummy comment line, to avoid errors with the Makefile + # "include basename.Plo" scheme. + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +icc) + # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'. + # However on + # $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c + # ICC 7.0 will fill foo.d with something like + # foo.o: sub/foo.c + # foo.o: sub/foo.h + # which is wrong. We want + # sub/foo.o: sub/foo.c + # sub/foo.o: sub/foo.h + # sub/foo.c: + # sub/foo.h: + # ICC 7.1 will output + # foo.o: sub/foo.c sub/foo.h + # and will wrap long lines using '\': + # foo.o: sub/foo.c ... \ + # sub/foo.h ... \ + # ... + # tcc 0.9.26 (FIXME still under development at the moment of writing) + # will emit a similar output, but also prepend the continuation lines + # with horizontal tabulation characters. + "$@" -MD -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + # Each line is of the form 'foo.o: dependent.h', + # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'. + # Do two passes, one to just change these to + # '$object: dependent.h' and one to simply 'dependent.h:'. + sed -e "s/^[ $tab][ $tab]*/ /" -e "s,^[^:]*:,$object :," \ + < "$tmpdepfile" > "$depfile" + sed ' + s/[ '"$tab"'][ '"$tab"']*/ /g + s/^ *// + s/ *\\*$// + s/^[^:]*: *// + /^$/d + /:$/d + s/$/ :/ + ' < "$tmpdepfile" >> "$depfile" + rm -f "$tmpdepfile" + ;; + +hp2) + # The "hp" stanza above does not work with aCC (C++) and HP's ia64 + # compilers, which have integrated preprocessors. The correct option + # to use with these is +Maked; it writes dependencies to a file named + # 'foo.d', which lands next to the object file, wherever that + # happens to be. + # Much of this is similar to the tru64 case; see comments there. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + if test "$libtool" = yes; then + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir.libs/$base.d + "$@" -Wc,+Maked + else + tmpdepfile1=$dir$base.d + tmpdepfile2=$dir$base.d + "$@" +Maked + fi + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile" + # Add 'dependent.h:' lines. + sed -ne '2,${ + s/^ *// + s/ \\*$// + s/$/:/ + p + }' "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" "$tmpdepfile2" + ;; + +tru64) + # The Tru64 compiler uses -MD to generate dependencies as a side + # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'. + # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put + # dependencies in 'foo.d' instead, so we check for that too. + # Subdirectories are respected. + dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` + test "x$dir" = "x$object" && dir= + base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` + + if test "$libtool" = yes; then + # With Tru64 cc, shared objects can also be used to make a + # static library. This mechanism is used in libtool 1.4 series to + # handle both shared and static libraries in a single compilation. + # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. + # + # With libtool 1.5 this exception was removed, and libtool now + # generates 2 separate objects for the 2 libraries. These two + # compilations output dependencies in $dir.libs/$base.o.d and + # in $dir$base.o.d. We have to check for both files, because + # one of the two compilations can be disabled. We should prefer + # $dir$base.o.d over $dir.libs/$base.o.d because the latter is + # automatically cleaned when .libs/ is deleted, while ignoring + # the former would cause a distcleancheck panic. + tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 + tmpdepfile2=$dir$base.o.d # libtool 1.5 + tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 + tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 + "$@" -Wc,-MD + else + tmpdepfile1=$dir$base.o.d + tmpdepfile2=$dir$base.d + tmpdepfile3=$dir$base.d + tmpdepfile4=$dir$base.d + "$@" -MD + fi + + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + exit $stat + fi + + for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" + do + test -f "$tmpdepfile" && break + done + if test -f "$tmpdepfile"; then + sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" + sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" + else + echo "#dummy" > "$depfile" + fi + rm -f "$tmpdepfile" + ;; + +msvc7) + if test "$libtool" = yes; then + showIncludes=-Wc,-showIncludes + else + showIncludes=-showIncludes + fi + "$@" $showIncludes > "$tmpdepfile" + stat=$? + grep -v '^Note: including file: ' "$tmpdepfile" + if test "$stat" = 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + echo "$object : \\" > "$depfile" + # The first sed program below extracts the file names and escapes + # backslashes for cygpath. The second sed program outputs the file + # name when reading, but also accumulates all include files in the + # hold buffer in order to output them again at the end. This only + # works with sed implementations that can handle large buffers. + sed < "$tmpdepfile" -n ' +/^Note: including file: *\(.*\)/ { + s//\1/ + s/\\/\\\\/g + p +}' | $cygpath_u | sort -u | sed -n ' +s/ /\\ /g +s/\(.*\)/'"$tab"'\1 \\/p +s/.\(.*\) \\/\1:/ +H +$ { + s/.*/'"$tab"'/ + G + p +}' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvc7msys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +#nosideeffect) + # This comment above is used by automake to tell side-effect + # dependency tracking mechanisms from slower ones. + +dashmstdout) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout, regardless of -o. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + # Remove '-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + test -z "$dashmflag" && dashmflag=-M + # Require at least two characters before searching for ':' + # in the target name. This is to cope with DOS-style filenames: + # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise. + "$@" $dashmflag | + sed 's:^['"$tab"' ]*[^:'"$tab"' ][^:][^:]*\:['"$tab"' ]*:'"$object"'\: :' > "$tmpdepfile" + rm -f "$depfile" + cat < "$tmpdepfile" > "$depfile" + tr ' ' "$nl" < "$tmpdepfile" | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +dashXmstdout) + # This case only exists to satisfy depend.m4. It is never actually + # run, as this mode is specially recognized in the preamble. + exit 1 + ;; + +makedepend) + "$@" || exit $? + # Remove any Libtool call + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + # X makedepend + shift + cleared=no eat=no + for arg + do + case $cleared in + no) + set ""; shift + cleared=yes ;; + esac + if test $eat = yes; then + eat=no + continue + fi + case "$arg" in + -D*|-I*) + set fnord "$@" "$arg"; shift ;; + # Strip any option that makedepend may not understand. Remove + # the object too, otherwise makedepend will parse it as a source file. + -arch) + eat=yes ;; + -*|$object) + ;; + *) + set fnord "$@" "$arg"; shift ;; + esac + done + obj_suffix=`echo "$object" | sed 's/^.*\././'` + touch "$tmpdepfile" + ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" + rm -f "$depfile" + # makedepend may prepend the VPATH from the source file name to the object. + # No need to regex-escape $object, excess matching of '.' is harmless. + sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile" + sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \ +## Some versions of the HPUX 10.20 sed can't process this invocation +## correctly. Breaking it into two sed invocations is a workaround. + sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" "$tmpdepfile".bak + ;; + +cpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + # Remove '-o $object'. + IFS=" " + for arg + do + case $arg in + -o) + shift + ;; + $object) + shift + ;; + *) + set fnord "$@" "$arg" + shift # fnord + shift # $arg + ;; + esac + done + + "$@" -E | + sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ + -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | + sed '$ s: \\$::' > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + cat < "$tmpdepfile" >> "$depfile" + sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvisualcpp) + # Important note: in order to support this mode, a compiler *must* + # always write the preprocessed file to stdout. + "$@" || exit $? + + # Remove the call to Libtool. + if test "$libtool" = yes; then + while test "X$1" != 'X--mode=compile'; do + shift + done + shift + fi + + IFS=" " + for arg + do + case "$arg" in + -o) + shift + ;; + $object) + shift + ;; + "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") + set fnord "$@" + shift + shift + ;; + *) + set fnord "$@" "$arg" + shift + shift + ;; + esac + done + "$@" -E 2>/dev/null | + sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile" + rm -f "$depfile" + echo "$object : \\" > "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile" + echo "$tab" >> "$depfile" + sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile" + rm -f "$tmpdepfile" + ;; + +msvcmsys) + # This case exists only to let depend.m4 do its work. It works by + # looking at the text of this script. This case will never be run, + # since it is checked for above. + exit 1 + ;; + +none) + exec "$@" + ;; + +*) + echo "Unknown depmode $depmode" 1>&2 + exit 1 + ;; +esac + +exit 0 + +# Local Variables: +# mode: shell-script +# sh-indentation: 2 +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: diff --git a/missing b/missing new file mode 100755 index 0000000..86a8fc3 --- /dev/null +++ b/missing @@ -0,0 +1,331 @@ +#! /bin/sh +# Common stub for a few missing GNU programs while installing. + +scriptversion=2012-01-06.13; # UTC + +# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006, +# 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc. +# Originally by Fran,cois Pinard , 1996. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +if test $# -eq 0; then + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 +fi + +run=: +sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' +sed_minuso='s/.* -o \([^ ]*\).*/\1/p' + +# In the cases where this matters, `missing' is being run in the +# srcdir already. +if test -f configure.ac; then + configure_ac=configure.ac +else + configure_ac=configure.in +fi + +msg="missing on your system" + +case $1 in +--run) + # Try to run requested program, and just exit if it succeeds. + run= + shift + "$@" && exit 0 + # Exit code 63 means version mismatch. This often happens + # when the user try to use an ancient version of a tool on + # a file that requires a minimum version. In this case we + # we should proceed has if the program had been absent, or + # if --run hadn't been passed. + if test $? = 63; then + run=: + msg="probably too old" + fi + ;; + + -h|--h|--he|--hel|--help) + echo "\ +$0 [OPTION]... PROGRAM [ARGUMENT]... + +Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an +error status if there is no known handling for PROGRAM. + +Options: + -h, --help display this help and exit + -v, --version output version information and exit + --run try to run the given command, and emulate it if it fails + +Supported PROGRAM values: + aclocal touch file \`aclocal.m4' + autoconf touch file \`configure' + autoheader touch file \`config.h.in' + autom4te touch the output file, or create a stub one + automake touch all \`Makefile.in' files + bison create \`y.tab.[ch]', if possible, from existing .[ch] + flex create \`lex.yy.c', if possible, from existing .c + help2man touch the output file + lex create \`lex.yy.c', if possible, from existing .c + makeinfo touch the output file + yacc create \`y.tab.[ch]', if possible, from existing .[ch] + +Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and +\`g' are ignored when checking the name. + +Send bug reports to ." + exit $? + ;; + + -v|--v|--ve|--ver|--vers|--versi|--versio|--version) + echo "missing $scriptversion (GNU Automake)" + exit $? + ;; + + -*) + echo 1>&2 "$0: Unknown \`$1' option" + echo 1>&2 "Try \`$0 --help' for more information" + exit 1 + ;; + +esac + +# normalize program name to check for. +program=`echo "$1" | sed ' + s/^gnu-//; t + s/^gnu//; t + s/^g//; t'` + +# Now exit if we have it, but it failed. Also exit now if we +# don't have it and --version was passed (most likely to detect +# the program). This is about non-GNU programs, so use $1 not +# $program. +case $1 in + lex*|yacc*) + # Not GNU programs, they don't have --version. + ;; + + *) + if test -z "$run" && ($1 --version) > /dev/null 2>&1; then + # We have it, but it failed. + exit 1 + elif test "x$2" = "x--version" || test "x$2" = "x--help"; then + # Could not run --version or --help. This is probably someone + # running `$TOOL --version' or `$TOOL --help' to check whether + # $TOOL exists and not knowing $TOOL uses missing. + exit 1 + fi + ;; +esac + +# If it does not exist, or fails to run (possibly an outdated version), +# try to emulate it. +case $program in + aclocal*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`acinclude.m4' or \`${configure_ac}'. You might want + to install the \`Automake' and \`Perl' packages. Grab them from + any GNU archive site." + touch aclocal.m4 + ;; + + autoconf*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`${configure_ac}'. You might want to install the + \`Autoconf' and \`GNU m4' packages. Grab them from any GNU + archive site." + touch configure + ;; + + autoheader*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`acconfig.h' or \`${configure_ac}'. You might want + to install the \`Autoconf' and \`GNU m4' packages. Grab them + from any GNU archive site." + files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` + test -z "$files" && files="config.h" + touch_files= + for f in $files; do + case $f in + *:*) touch_files="$touch_files "`echo "$f" | + sed -e 's/^[^:]*://' -e 's/:.*//'`;; + *) touch_files="$touch_files $f.in";; + esac + done + touch $touch_files + ;; + + automake*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. + You might want to install the \`Automake' and \`Perl' packages. + Grab them from any GNU archive site." + find . -type f -name Makefile.am -print | + sed 's/\.am$/.in/' | + while read f; do touch "$f"; done + ;; + + autom4te*) + echo 1>&2 "\ +WARNING: \`$1' is needed, but is $msg. + You might have modified some files without having the + proper tools for further handling them. + You can get \`$1' as part of \`Autoconf' from any GNU + archive site." + + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo "#! /bin/sh" + echo "# Created by GNU Automake missing as a replacement of" + echo "# $ $@" + echo "exit 0" + chmod +x $file + exit 1 + fi + ;; + + bison*|yacc*) + echo 1>&2 "\ +WARNING: \`$1' $msg. You should only need it if + you modified a \`.y' file. You may need the \`Bison' package + in order for those modifications to take effect. You can get + \`Bison' from any GNU archive site." + rm -f y.tab.c y.tab.h + if test $# -ne 1; then + eval LASTARG=\${$#} + case $LASTARG in + *.y) + SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` + if test -f "$SRCFILE"; then + cp "$SRCFILE" y.tab.c + fi + SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` + if test -f "$SRCFILE"; then + cp "$SRCFILE" y.tab.h + fi + ;; + esac + fi + if test ! -f y.tab.h; then + echo >y.tab.h + fi + if test ! -f y.tab.c; then + echo 'main() { return 0; }' >y.tab.c + fi + ;; + + lex*|flex*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a \`.l' file. You may need the \`Flex' package + in order for those modifications to take effect. You can get + \`Flex' from any GNU archive site." + rm -f lex.yy.c + if test $# -ne 1; then + eval LASTARG=\${$#} + case $LASTARG in + *.l) + SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` + if test -f "$SRCFILE"; then + cp "$SRCFILE" lex.yy.c + fi + ;; + esac + fi + if test ! -f lex.yy.c; then + echo 'main() { return 0; }' >lex.yy.c + fi + ;; + + help2man*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a dependency of a manual page. You may need the + \`Help2man' package in order for those modifications to take + effect. You can get \`Help2man' from any GNU archive site." + + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -f "$file"; then + touch $file + else + test -z "$file" || exec >$file + echo ".ab help2man is required to generate this page" + exit $? + fi + ;; + + makeinfo*) + echo 1>&2 "\ +WARNING: \`$1' is $msg. You should only need it if + you modified a \`.texi' or \`.texinfo' file, or any other file + indirectly affecting the aspect of the manual. The spurious + call might also be the consequence of using a buggy \`make' (AIX, + DU, IRIX). You might want to install the \`Texinfo' package or + the \`GNU make' package. Grab either from any GNU archive site." + # The file to touch is that specified with -o ... + file=`echo "$*" | sed -n "$sed_output"` + test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` + if test -z "$file"; then + # ... or it is the one specified with @setfilename ... + infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` + file=`sed -n ' + /^@setfilename/{ + s/.* \([^ ]*\) *$/\1/ + p + q + }' $infile` + # ... or it is derived from the source name (dir/f.texi becomes f.info) + test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info + fi + # If the file does not exist, the user really needs makeinfo; + # let's fail without touching anything. + test -f $file || exit 1 + touch $file + ;; + + *) + echo 1>&2 "\ +WARNING: \`$1' is needed, and is $msg. + You might have modified some files without having the + proper tools for further handling them. Check the \`README' file, + it often tells you about the needed prerequisites for installing + this package. You may also peek at any GNU archive site, in case + some other package would contain this missing \`$1' program." + exit 1 + ;; +esac + +exit 0 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "scriptversion=" +# time-stamp-format: "%:y-%02m-%02d.%02H" +# time-stamp-time-zone: "UTC" +# time-stamp-end: "; # UTC" +# End: