#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.68 for psensor 0.6.2.15.
+# Generated by GNU Autoconf 2.69 for psensor 1.1.0.x.
#
# Report bugs to <jeanfi@gmail.com>.
#
#
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software
-# Foundation, Inc.
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
#
#
# This configure script is free software; the Free Software Foundation
# CDPATH.
(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+# Use a proper internal environment variable to ensure we don't fall
+ # into an infinite loop, continuously re-executing ourselves.
+ if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+ _as_can_reexec=no; export _as_can_reexec;
+ # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+ fi
+ # We don't want this to propagate to other subprocesses.
+ { _as_can_reexec=; unset _as_can_reexec;}
if test "x$CONFIG_SHELL" = x; then
as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
else
exitcode=1; echo positional parameters were not saved.
fi
-test x\$exitcode = x0 || exit 1"
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
if test "x$CONFIG_SHELL" != x; then :
- # We cannot yet assume a decent shell, so we have to provide a
- # neutralization value for shells without unset; and this also
- # works around shells that cannot unset nonexistent variables.
- # Preserve -v and -x to the replacement shell.
- BASH_ENV=/dev/null
- ENV=/dev/null
- (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
- export CONFIG_SHELL
- case $- in # ((((
- *v*x* | *x*v* ) as_opts=-vx ;;
- *v* ) as_opts=-v ;;
- *x* ) as_opts=-x ;;
- * ) as_opts= ;;
- esac
- exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"}
+ export CONFIG_SHELL
+ # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
fi
if test x$as_have_required = xno; then :
} # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+} # as_fn_executable_p
# as_fn_append VAR VALUE
# ----------------------
# Append the text in VALUE to the end of the definition contained in VAR. Take
chmod +x "$as_me.lineno" ||
{ $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+ # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+ # already done that, so ensure we don't try to do so again and fall
+ # in an infinite loop. This has already happened in practice.
+ _as_can_reexec=no; export _as_can_reexec
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
# original and so on. Autoconf is especially sensitive to this).
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
+ # In both cases, we have to default to `cp -pR'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
fi
else
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
as_mkdir_p=false
fi
-if test -x / >/dev/null 2>&1; then
- as_test_x='test -x'
-else
- if ls -dL / >/dev/null 2>&1; then
- as_ls_L_option=L
- else
- as_ls_L_option=
- fi
- as_test_x='
- eval sh -c '\''
- if test -d "$1"; then
- test -d "$1/.";
- else
- case $1 in #(
- -*)set "./$1";;
- esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
- ???[sx]*):;;*)false;;esac;fi
- '\'' sh
- '
-fi
-as_executable_p=$as_test_x
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
# Identity of this package.
PACKAGE_NAME='psensor'
PACKAGE_TARNAME='psensor'
-PACKAGE_VERSION='0.6.2.15'
-PACKAGE_STRING='psensor 0.6.2.15'
+PACKAGE_VERSION='1.1.0.x'
+PACKAGE_STRING='psensor 1.1.0.x'
PACKAGE_BUGREPORT='jeanfi@gmail.com'
PACKAGE_URL='http://wpitchoune.net/psensor'
-ac_unique_file="src/compat.h"
+ac_unique_file="src/ui.c"
# Factoring default headers for most tests.
ac_includes_default="\
#include <stdio.h>
ac_subst_vars='am__EXEEXT_FALSE
am__EXEEXT_TRUE
LTLIBOBJS
+CPPCHECK_FALSE
+CPPCHECK_TRUE
+HAVE_CPPCHECK
+ASCIIDOC_FALSE
+ASCIIDOC_TRUE
+ASCIIDOC
HELP2MAN
GTOP_FALSE
GTOP_TRUE
LIBNOTIFY_TRUE
LIBNOTIFY_LIBS
LIBNOTIFY_CFLAGS
-GCONF_LIBS
-GCONF_CFLAGS
+ATASMART_FALSE
+ATASMART_TRUE
+ATASMART_LIBS
+ATASMART_CFLAGS
+LIBUDISKS2_FALSE
+LIBUDISKS2_TRUE
+LIBUDISKS2_LIBS
+LIBUDISKS2_CFLAGS
GTK_FALSE
GTK_TRUE
GTK_LIBS
GTK_CFLAGS
+XEXT_FALSE
+XEXT_TRUE
XEXT_LIBS
XEXT_CFLAGS
+X11_FALSE
+X11_TRUE
X11_LIBS
X11_CFLAGS
+SENSORS_LIBS
+PTHREAD_LIBS
+GSETTINGS_RULES
+GLIB_COMPILE_SCHEMAS
+gsettingsschemadir
PKG_CONFIG_LIBDIR
PKG_CONFIG_PATH
PKG_CONFIG
-SENSORS_LIBS
+GSETTINGS_DISABLE_SCHEMAS_COMPILE
POSUB
LTLIBINTL
LIBINTL
build_vendor
build_cpu
build
-XGETTEXT_EXTRA_OPTIONS
MSGMERGE
XGETTEXT_015
XGETTEXT
MSGFMT_015
GMSGFMT
MSGFMT
-GETTEXT_MACRO_VERSION
USE_NLS
LIBOBJS
EGREP
GREP
CPP
XMKMF
+ac_ct_AR
+AR
RANLIB
am__fastdepCC_FALSE
am__fastdepCC_TRUE
CCDEPMODE
+am__nodep
AMDEPBACKSLASH
AMDEP_FALSE
AMDEP_TRUE
LDFLAGS
CFLAGS
CC
+AM_BACKSLASH
+AM_DEFAULT_VERBOSITY
+AM_DEFAULT_V
+AM_V
am__untar
am__tar
AMTAR
ac_subst_files=''
ac_user_opts='
enable_option_checking
+enable_silent_rules
enable_dependency_tracking
+enable_largefile
with_x
enable_nls
with_gnu_ld
enable_rpath
with_libiconv_prefix
with_libintl_prefix
+enable_schemas_compile
with_libatiadl
with_gtop
'
XEXT_LIBS
GTK_CFLAGS
GTK_LIBS
-GCONF_CFLAGS
-GCONF_LIBS
+LIBUDISKS2_CFLAGS
+LIBUDISKS2_LIBS
+ATASMART_CFLAGS
+ATASMART_LIBS
LIBNOTIFY_CFLAGS
LIBNOTIFY_LIBS
APPINDICATOR_CFLAGS
if test "x$host_alias" != x; then
if test "x$build_alias" = x; then
cross_compiling=maybe
- $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host.
- If a cross compiler is detected then cross compile mode will be used" >&2
elif test "x$build_alias" != "x$host_alias"; then
cross_compiling=yes
fi
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures psensor 0.6.2.15 to adapt to many kinds of systems.
+\`configure' configures psensor 1.1.0.x to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of psensor 0.6.2.15:";;
+ short | recursive ) echo "Configuration of psensor 1.1.0.x:";;
esac
cat <<\_ACEOF
--disable-option-checking ignore unrecognized --enable/--with options
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --disable-dependency-tracking speeds up one-time build
- --enable-dependency-tracking do not reject slow dependency extractors
+ --enable-silent-rules less verbose build output (undo: "make V=1")
+ --disable-silent-rules verbose build output (undo: "make V=0")
+ --enable-dependency-tracking
+ do not reject slow dependency extractors
+ --disable-dependency-tracking
+ speeds up one-time build
+ --disable-largefile omit support for large files
--disable-nls do not use Native Language Support
--disable-rpath do not hardcode runtime library paths
+ --disable-schemas-compile
+ Disable regeneration of gschemas.compiled on install
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
XEXT_LIBS linker flags for XEXT, overriding pkg-config
GTK_CFLAGS C compiler flags for GTK, overriding pkg-config
GTK_LIBS linker flags for GTK, overriding pkg-config
- GCONF_CFLAGS
- C compiler flags for GCONF, overriding pkg-config
- GCONF_LIBS linker flags for GCONF, overriding pkg-config
+ LIBUDISKS2_CFLAGS
+ C compiler flags for LIBUDISKS2, overriding pkg-config
+ LIBUDISKS2_LIBS
+ linker flags for LIBUDISKS2, overriding pkg-config
+ ATASMART_CFLAGS
+ C compiler flags for ATASMART, overriding pkg-config
+ ATASMART_LIBS
+ linker flags for ATASMART, overriding pkg-config
LIBNOTIFY_CFLAGS
C compiler flags for LIBNOTIFY, overriding pkg-config
LIBNOTIFY_LIBS
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-psensor configure 0.6.2.15
-generated by GNU Autoconf 2.68
+psensor configure 1.1.0.x
+generated by GNU Autoconf 2.69
-Copyright (C) 2010 Free Software Foundation, Inc.
+Copyright (C) 2012 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
test ! -s conftest.err
} && test -s conftest$ac_exeext && {
test "$cross_compiling" = yes ||
- $as_test_x conftest$ac_exeext
+ test -x conftest$ac_exeext
}; then :
ac_retval=0
else
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by psensor $as_me 0.6.2.15, which was
-generated by GNU Autoconf 2.68. Invocation command line was
+It was created by psensor $as_me 1.1.0.x, which was
+generated by GNU Autoconf 2.69. Invocation command line was
$ $0 $@
-am__api_version='1.11'
+am__api_version='1.14'
ac_aux_dir=
for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
# by default.
for ac_prog in ginstall scoinst install; do
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
if test $ac_prog = install &&
grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
$as_echo_n "checking whether build environment is sane... " >&6; }
-# Just in case
-sleep 1
-echo timestamp > conftest.file
# Reject unsafe characters in $srcdir or the absolute working directory
# name. Accept space and tab only in the latter.
am_lf='
esac
case $srcdir in
*[\\\"\#\$\&\'\`$am_lf\ \ ]*)
- as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+ as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
esac
-# Do `set' in a subshell so we don't clobber the current shell's
+# Do 'set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
- set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
- if test "$*" = "X"; then
- # -L didn't work.
- set X `ls -t "$srcdir/configure" conftest.file`
- fi
- rm -f conftest.file
- if test "$*" != "X $srcdir/configure conftest.file" \
- && test "$*" != "X conftest.file $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
-alias in your environment" "$LINENO" 5
- fi
-
+ am_has_slept=no
+ for am_try in 1 2; do
+ echo "timestamp, slept: $am_has_slept" > conftest.file
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ if test "$*" != "X $srcdir/configure conftest.file" \
+ && test "$*" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
+ alias in your environment" "$LINENO" 5
+ fi
+ if test "$2" = conftest.file || test $am_try -eq 2; then
+ break
+ fi
+ # Just in case.
+ sleep 1
+ am_has_slept=yes
+ done
test "$2" = conftest.file
)
then
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+ ( sleep 1 ) &
+ am_sleep_pid=$!
+fi
+
+rm -f conftest.file
+
test "$program_prefix" != NONE &&
program_transform_name="s&^&$program_prefix&;$program_transform_name"
# Use a double $ so make ignores it.
esac
fi
# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
+if eval "$MISSING --is-lightweight"; then
+ am_missing_run="$MISSING "
else
am_missing_run=
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
-$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
fi
if test x"${install_sh}" != xset; then
esac
fi
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'. However `strip' might not be the right
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip". However 'strip' might not be the right
# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
+# will honor the 'STRIP' environment variable to overrule this program.
if test "$cross_compiling" != no; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_STRIP="${ac_tool_prefix}strip"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_STRIP="strip"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
test -z "$as_dir" && as_dir=.
for ac_prog in mkdir gmkdir; do
for ac_exec_ext in '' $ac_executable_extensions; do
- { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
+ as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
'mkdir (GNU coreutils) '* | \
'mkdir (coreutils) '* | \
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
$as_echo "$MKDIR_P" >&6; }
-mkdir_p="$MKDIR_P"
-case $mkdir_p in
- [\\/$]* | ?:[\\/]*) ;;
- */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
-esac
-
for ac_prog in gawk mawk nawk awk
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_AWK="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
rmdir .tst 2>/dev/null
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+ enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+ yes) AM_DEFAULT_VERBOSITY=0;;
+ no) AM_DEFAULT_VERBOSITY=1;;
+ *) AM_DEFAULT_VERBOSITY=1;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+ @$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+ am_cv_make_support_nested_variables=yes
+else
+ am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+ AM_V='$(V)'
+ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+ AM_V=$AM_DEFAULT_VERBOSITY
+ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
if test "`cd $srcdir && pwd`" != "`pwd`"; then
# Use -I$(srcdir) only when $(srcdir) != ., so that make's output
# is not polluted with repeated "-I."
# Define the identity of the package.
PACKAGE='psensor'
- VERSION='0.6.2.15'
+ VERSION='1.1.0.x'
cat >>confdefs.h <<_ACEOF
MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+# For better backward compatibility. To be removed once Automake 1.9.x
+# dies out for good. For more background, see:
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+mkdir_p='$(MKDIR_P)'
+
# We need awk for the "check" target. The system "awk" is bad on
# some platforms.
-# Always define AMTAR for backward compatibility.
+# Always define AMTAR for backward compatibility. Yes, it's still used
+# in the wild :-( We should find a proper way to deprecate it ...
+AMTAR='$${TAR-tar}'
+
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar pax cpio none'
+
+am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
+
-AMTAR=${AMTAR-"${am_missing_run}tar"}
-am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes. So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+ cat >&2 <<'END'
+Oops!
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present. This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message. This
+can help us improve future automake versions.
+
+END
+ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+ echo 'Configuration will proceed anyway, since you have set the' >&2
+ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+ echo >&2
+ else
+ cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <http://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+ as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
+ fi
+fi
ac_config_headers="$ac_config_headers config.h"
+# m4
+
+
# Checks for programs.
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_CC="${ac_tool_prefix}gcc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_CC="gcc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_CC="${ac_tool_prefix}cc"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
ac_prog_rejected=yes
continue
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_CC="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
/* end confdefs.h. */
#include <stdarg.h>
#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
+struct stat;
/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
struct buf { int x; };
FILE * (*rcsopen) (struct buf *, struct stat *, int);
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
+if ${am_cv_prog_cc_c_o+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ # Make sure it works both with $CC and with simple cc.
+ # Following AC_PROG_CC_C_O, we do the test twice because some
+ # compilers refuse to overwrite an existing .o file with -o,
+ # though they will create one.
+ am_cv_prog_cc_c_o=yes
+ for am_i in 1 2; do
+ if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+ ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } \
+ && test -f conftest2.$ac_objext; then
+ : OK
+ else
+ am_cv_prog_cc_c_o=no
+ break
+ fi
+ done
+ rm -f core conftest*
+ unset am_i
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+$as_echo "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
DEPDIR="${am__leading_dot}deps"
ac_config_commands="$ac_config_commands depfiles"
_am_result=none
# First try GNU make style include.
echo "include confinc" > confmf
-# Ignore all kinds of additional output from `make'.
+# Ignore all kinds of additional output from 'make'.
case `$am_make -s -f confmf 2> /dev/null` in #(
*the\ am__doit\ target*)
am__include=include
if test "x$enable_dependency_tracking" != xno; then
am_depcomp="$ac_aux_dir/depcomp"
AMDEPBACKSLASH='\'
+ am__nodep='_no'
fi
if test "x$enable_dependency_tracking" != xno; then
AMDEP_TRUE=
# We make a subdir and do the tests there. Otherwise we can end up
# making bogus files that we don't know about and never remove. For
# instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
+ # making a dummy file named 'D' -- because '-MD' means "put the output
+ # in D".
+ rm -rf conftest.dir
mkdir conftest.dir
# Copy depcomp to subdir because otherwise we won't find it if we're
# using a relative directory.
: > sub/conftest.c
for i in 1 2 3 4 5 6; do
echo '#include "conftst'$i'.h"' >> sub/conftest.c
- # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
- # Solaris 8's {/usr,}/bin/sh.
- touch sub/conftst$i.h
+ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+ # Solaris 10 /bin/sh.
+ echo '/* dummy */' > sub/conftst$i.h
done
echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # We check with '-c' and '-o' for the sake of the "dashmstdout"
# mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this. Also, some Intel
- # versions had trouble with output in subdirs
+ # handle '-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs.
am__obj=sub/conftest.${OBJEXT-o}
am__minus_obj="-o $am__obj"
case $depmode in
test "$am__universal" = false || continue
;;
nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
+ # After this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested.
if test "x$enable_dependency_tracking" = xyes; then
continue
else
break
fi
;;
- msvisualcpp | msvcmsys)
- # This compiler won't grok `-c -o', but also, the minuso test has
+ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+ # This compiler won't grok '-c -o', but also, the minuso test has
# not run yet. These depmodes are late enough in the game, and
# so weak that their functioning should not be impacted.
am__obj=conftest.${OBJEXT-o}
fi
-if test "x$CC" != xcc; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC and cc understand -c and -o together" >&5
-$as_echo_n "checking whether $CC and cc understand -c and -o together... " >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether cc understands -c and -o together" >&5
-$as_echo_n "checking whether cc understands -c and -o together... " >&6; }
+
+
+
+# Check whether --enable-largefile was given.
+if test "${enable_largefile+set}" = set; then :
+ enableval=$enable_largefile;
fi
-set dummy $CC; ac_cc=`$as_echo "$2" |
- sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
-if eval \${ac_cv_prog_cc_${ac_cc}_c_o+:} false; then :
+
+if test "$enable_largefile" != no; then
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for special C compiler options needed for large files" >&5
+$as_echo_n "checking for special C compiler options needed for large files... " >&6; }
+if ${ac_cv_sys_largefile_CC+:} false; then :
$as_echo_n "(cached) " >&6
else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ ac_cv_sys_largefile_CC=no
+ if test "$GCC" != yes; then
+ ac_save_CC=$CC
+ while :; do
+ # IRIX 6.2 and later do not support large files by default,
+ # so use the C compiler's -n32 option if that helps.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
-
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
int
main ()
{
return 0;
}
_ACEOF
-# Make sure it works both with $CC and with simple cc.
-# We do the test twice because some compilers refuse to overwrite an
-# existing .o file with -o, though they will create one.
-ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5'
-rm -f conftest2.*
-if { { case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } &&
- test -f conftest2.$ac_objext && { { case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; };
-then
- eval ac_cv_prog_cc_${ac_cc}_c_o=yes
- if test "x$CC" != xcc; then
- # Test first that cc exists at all.
- if { ac_try='cc -c conftest.$ac_ext >&5'
- { { case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; }; }; then
- ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5'
- rm -f conftest2.*
- if { { case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } &&
- test -f conftest2.$ac_objext && { { case "(($ac_try" in
- *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
- *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
-$as_echo "$ac_try_echo"; } >&5
- (eval "$ac_try") 2>&5
- ac_status=$?
- $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; };
- then
- # cc works too.
- :
- else
- # cc exists but doesn't like -o.
- eval ac_cv_prog_cc_${ac_cc}_c_o=no
- fi
+ if ac_fn_c_try_compile "$LINENO"; then :
+ break
+fi
+rm -f core conftest.err conftest.$ac_objext
+ CC="$CC -n32"
+ if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_sys_largefile_CC=' -n32'; break
+fi
+rm -f core conftest.err conftest.$ac_objext
+ break
+ done
+ CC=$ac_save_CC
+ rm -f conftest.$ac_ext
fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_largefile_CC" >&5
+$as_echo "$ac_cv_sys_largefile_CC" >&6; }
+ if test "$ac_cv_sys_largefile_CC" != no; then
+ CC=$CC$ac_cv_sys_largefile_CC
fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _FILE_OFFSET_BITS value needed for large files" >&5
+$as_echo_n "checking for _FILE_OFFSET_BITS value needed for large files... " >&6; }
+if ${ac_cv_sys_file_offset_bits+:} false; then :
+ $as_echo_n "(cached) " >&6
else
- eval ac_cv_prog_cc_${ac_cc}_c_o=no
+ while :; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_sys_file_offset_bits=no; break
fi
-rm -f core conftest*
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#define _FILE_OFFSET_BITS 64
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_sys_file_offset_bits=64; break
fi
-if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_cv_sys_file_offset_bits=unknown
+ break
+done
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_file_offset_bits" >&5
+$as_echo "$ac_cv_sys_file_offset_bits" >&6; }
+case $ac_cv_sys_file_offset_bits in #(
+ no | unknown) ;;
+ *)
+cat >>confdefs.h <<_ACEOF
+#define _FILE_OFFSET_BITS $ac_cv_sys_file_offset_bits
+_ACEOF
+;;
+esac
+rm -rf conftest*
+ if test $ac_cv_sys_file_offset_bits = unknown; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _LARGE_FILES value needed for large files" >&5
+$as_echo_n "checking for _LARGE_FILES value needed for large files... " >&6; }
+if ${ac_cv_sys_large_files+:} false; then :
+ $as_echo_n "(cached) " >&6
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-
-$as_echo "#define NO_MINUS_C_MINUS_O 1" >>confdefs.h
+ while :; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_sys_large_files=no; break
fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#define _LARGE_FILES 1
+#include <sys/types.h>
+ /* Check that off_t can represent 2**63 - 1 correctly.
+ We can't simply define LARGE_OFF_T to be 9223372036854775807,
+ since some C++ compilers masquerading as C compilers
+ incorrectly reject 9223372036854775807. */
+#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
+ int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
+ && LARGE_OFF_T % 2147483647 == 1)
+ ? 1 : -1];
+int
+main ()
+{
-# FIXME: we rely on the cache variable name because
-# there is no other way.
-set dummy $CC
-am_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
-eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o
-if test "$am_t" != yes; then
- # Losing compiler, so override with the script.
- # FIXME: It is wrong to rewrite CC.
- # But if we don't then we get into trouble of one sort or another.
- # A longer-term fix would be to have automake use am__CC in this case,
- # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
- CC="$am_aux_dir/compile $CC"
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_sys_large_files=1; break
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_cv_sys_large_files=unknown
+ break
+done
fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sys_large_files" >&5
+$as_echo "$ac_cv_sys_large_files" >&6; }
+case $ac_cv_sys_large_files in #(
+ no | unknown) ;;
+ *)
+cat >>confdefs.h <<_ACEOF
+#define _LARGE_FILES $ac_cv_sys_large_files
+_ACEOF
+;;
+esac
+rm -rf conftest*
+ fi
+
+fi
# Checks lib build
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_ac_ct_RANLIB="ranlib"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
RANLIB="$ac_cv_prog_RANLIB"
fi
-
-# Checks for header files.
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
-$as_echo_n "checking how to run the C preprocessor... " >&6; }
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
- if ${ac_cv_prog_CPP+:} false; then :
- $as_echo_n "(cached) " >&6
+if test -n "$ac_tool_prefix"; then
+ for ac_prog in ar lib "link -lib"
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$AR" && break
+ done
+fi
+if test -z "$AR"; then
+ ac_ct_AR=$AR
+ for ac_prog in ar lib "link -lib"
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_AR"; then
+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_AR="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_AR" && break
+done
+
+ if test "x$ac_ct_AR" = x; then
+ AR="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ AR=$ac_ct_AR
+ fi
+fi
+
+: ${AR=ar}
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the archiver ($AR) interface" >&5
+$as_echo_n "checking the archiver ($AR) interface... " >&6; }
+if ${am_cv_ar_interface+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ am_cv_ar_interface=ar
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int some_variable = 0;
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ am_ar_try='$AR cru libconftest.a conftest.$ac_objext >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$am_ar_try\""; } >&5
+ (eval $am_ar_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if test "$ac_status" -eq 0; then
+ am_cv_ar_interface=ar
+ else
+ am_ar_try='$AR -NOLOGO -OUT:conftest.lib conftest.$ac_objext >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$am_ar_try\""; } >&5
+ (eval $am_ar_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if test "$ac_status" -eq 0; then
+ am_cv_ar_interface=lib
+ else
+ am_cv_ar_interface=unknown
+ fi
+ fi
+ rm -f conftest.lib libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_ar_interface" >&5
+$as_echo "$am_cv_ar_interface" >&6; }
+
+case $am_cv_ar_interface in
+ar)
+ ;;
+lib)
+ # Microsoft lib, so override with the ar-lib wrapper script.
+ # FIXME: It is wrong to rewrite AR.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__AR in this case,
+ # and then we could set am__AR="$am_aux_dir/ar-lib \$(AR)" or something
+ # similar.
+ AR="$am_aux_dir/ar-lib $AR"
+ ;;
+unknown)
+ as_fn_error $? "could not determine $AR interface" "$LINENO" 5
+ ;;
+esac
+
+
+# Checks for header files.
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+ if ${ac_cv_prog_CPP+:} false; then :
+ $as_echo_n "(cached) " >&6
else
# Double quotes because CPP needs to be expanded
for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
for ac_prog in grep ggrep; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+ as_fn_executable_p "$ac_path_GREP" || continue
# Check for GNU ac_path_GREP and select it if it is found.
# Check for GNU $ac_path_GREP
case `"$ac_path_GREP" --version 2>&1` in
for ac_prog in egrep; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
- { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+ as_fn_executable_p "$ac_path_EGREP" || continue
# Check for GNU ac_path_EGREP and select it if it is found.
# Check for GNU $ac_path_EGREP
case `"$ac_path_EGREP" --version 2>&1` in
done
-for ac_header in arpa/inet.h netinet/in.h stdint.h stdlib.h string.h sys/socket.h sys/time.h unistd.h getopt.h sys/sysinfo.h
+for ac_header in stdbool.h
do :
- as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+ ac_fn_c_check_header_mongrel "$LINENO" "stdbool.h" "ac_cv_header_stdbool_h" "$ac_includes_default"
+if test "x$ac_cv_header_stdbool_h" = xyes; then :
cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+#define HAVE_STDBOOL_H 1
_ACEOF
fi
fi
-for ac_func in gettimeofday memmove socket strdup strtol sysinfo
+for ac_func in gettimeofday memmove socket strdup strtol
do :
as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+mkdir_p="$MKDIR_P"
+case $mkdir_p in
+ [\\/$]* | ?:[\\/]*) ;;
+ */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;;
+esac
+
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether NLS is requested" >&5
$as_echo_n "checking whether NLS is requested... " >&6; }
# Check whether --enable-nls was given.
- GETTEXT_MACRO_VERSION=0.18
-
-
# Prepare PATH_SEPARATOR.
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
test -n "$localedir" || localedir='${datadir}/locale'
- test -n "${XGETTEXT_EXTRA_OPTIONS+set}" || XGETTEXT_EXTRA_OPTIONS=
-
-
ac_config_commands="$ac_config_commands po-directories"
# Canonicalize the path of ld
ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
+ ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
done
test -z "$LD" && LD="$ac_prog"
;;
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in
*GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break ;;
+ test "$with_gnu_ld" != no && break ;;
*)
- test "$with_gnu_ld" != yes && break ;;
+ test "$with_gnu_ld" != yes && break ;;
esac
fi
done
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $acl_cv_rpath" >&5
$as_echo "$acl_cv_rpath" >&6; }
wl="$acl_cv_wl"
- acl_libext="$acl_cv_libext"
- acl_shlibext="$acl_cv_shlibext"
- acl_libname_spec="$acl_cv_libname_spec"
- acl_library_names_spec="$acl_cv_library_names_spec"
- acl_hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
- acl_hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
- acl_hardcode_direct="$acl_cv_hardcode_direct"
- acl_hardcode_minus_L="$acl_cv_hardcode_minus_L"
+ libext="$acl_cv_libext"
+ shlibext="$acl_cv_shlibext"
+ hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec"
+ hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator"
+ hardcode_direct="$acl_cv_hardcode_direct"
+ hardcode_minus_L="$acl_cv_hardcode_minus_L"
# Check whether --enable-rpath was given.
if test "${enable_rpath+set}" = set; then :
enableval=$enable_rpath; :
-
- acl_libdirstem=lib
- acl_libdirstem2=
- case "$host_os" in
- solaris*)
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for 64-bit host" >&5
-$as_echo_n "checking for 64-bit host... " >&6; }
-if ${gl_cv_solaris_64bit+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#ifdef _LP64
-sixtyfour bits
-#endif
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "sixtyfour bits" >/dev/null 2>&1; then :
- gl_cv_solaris_64bit=yes
-else
- gl_cv_solaris_64bit=no
-fi
-rm -f conftest*
-
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gl_cv_solaris_64bit" >&5
-$as_echo "$gl_cv_solaris_64bit" >&6; }
- if test $gl_cv_solaris_64bit = yes; then
- acl_libdirstem=lib/64
- case "$host_cpu" in
- sparc*) acl_libdirstem2=lib/sparcv9 ;;
- i*86 | x86_64) acl_libdirstem2=lib/amd64 ;;
+ acl_libdirstem=lib
+ searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'`
+ if test -n "$searchpath"; then
+ acl_save_IFS="${IFS= }"; IFS=":"
+ for searchdir in $searchpath; do
+ if test -d "$searchdir"; then
+ case "$searchdir" in
+ */lib64/ | */lib64 ) acl_libdirstem=lib64 ;;
+ *) searchdir=`cd "$searchdir" && pwd`
+ case "$searchdir" in
+ */lib64 ) acl_libdirstem=lib64 ;;
+ esac ;;
esac
fi
- ;;
- *)
- searchpath=`(LC_ALL=C $CC -print-search-dirs) 2>/dev/null | sed -n -e 's,^libraries: ,,p' | sed -e 's,^=,,'`
- if test -n "$searchpath"; then
- acl_save_IFS="${IFS= }"; IFS=":"
- for searchdir in $searchpath; do
- if test -d "$searchdir"; then
- case "$searchdir" in
- */lib64/ | */lib64 ) acl_libdirstem=lib64 ;;
- */../ | */.. )
- # Better ignore directories of this form. They are misleading.
- ;;
- *) searchdir=`cd "$searchdir" && pwd`
- case "$searchdir" in
- */lib64 ) acl_libdirstem=lib64 ;;
- esac ;;
- esac
- fi
- done
- IFS="$acl_save_IFS"
- fi
- ;;
- esac
- test -n "$acl_libdirstem2" || acl_libdirstem2="$acl_libdirstem"
-
-
-
-
+ done
+ IFS="$acl_save_IFS"
+ fi
else
additional_includedir="$withval/include"
additional_libdir="$withval/$acl_libdirstem"
- if test "$acl_libdirstem2" != "$acl_libdirstem" \
- && ! test -d "$withval/$acl_libdirstem"; then
- additional_libdir="$withval/$acl_libdirstem2"
- fi
fi
fi
LIBICONV=
LTLIBICONV=
INCICONV=
- LIBICONV_PREFIX=
- HAVE_LIBICONV=
rpathdirs=
ltrpathdirs=
names_already_handled=
found_la=
found_so=
found_a=
- eval libname=\"$acl_libname_spec\" # typically: libname=lib$name
- if test -n "$acl_shlibext"; then
- shrext=".$acl_shlibext" # typically: shrext=.so
- else
- shrext=
- fi
if test $use_additional = yes; then
- dir="$additional_libdir"
- if test -n "$acl_shlibext"; then
- if test -f "$dir/$libname$shrext"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext"
+ if test -n "$shlibext" \
+ && { test -f "$additional_libdir/lib$name.$shlibext" \
+ || { test "$shlibext" = dll \
+ && test -f "$additional_libdir/lib$name.dll.a"; }; }; then
+ found_dir="$additional_libdir"
+ if test -f "$additional_libdir/lib$name.$shlibext"; then
+ found_so="$additional_libdir/lib$name.$shlibext"
else
- if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
- ver=`(cd "$dir" && \
- for f in "$libname$shrext".*; do echo "$f"; done \
- | sed -e "s,^$libname$shrext\\\\.,," \
- | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
- | sed 1q ) 2>/dev/null`
- if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext.$ver"
- fi
- else
- eval library_names=\"$acl_library_names_spec\"
- for f in $library_names; do
- if test -f "$dir/$f"; then
- found_dir="$dir"
- found_so="$dir/$f"
- break
- fi
- done
- fi
+ found_so="$additional_libdir/lib$name.dll.a"
fi
- fi
- if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$acl_libext"; then
- found_dir="$dir"
- found_a="$dir/$libname.$acl_libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
fi
- fi
- if test "X$found_dir" != "X"; then
- if test -f "$dir/$libname.la"; then
- found_la="$dir/$libname.la"
+ else
+ if test -f "$additional_libdir/lib$name.$libext"; then
+ found_dir="$additional_libdir"
+ found_a="$additional_libdir/lib$name.$libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
fi
fi
fi
case "$x" in
-L*)
dir=`echo "X$x" | sed -e 's/^X-L//'`
- if test -n "$acl_shlibext"; then
- if test -f "$dir/$libname$shrext"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext"
+ if test -n "$shlibext" \
+ && { test -f "$dir/lib$name.$shlibext" \
+ || { test "$shlibext" = dll \
+ && test -f "$dir/lib$name.dll.a"; }; }; then
+ found_dir="$dir"
+ if test -f "$dir/lib$name.$shlibext"; then
+ found_so="$dir/lib$name.$shlibext"
else
- if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
- ver=`(cd "$dir" && \
- for f in "$libname$shrext".*; do echo "$f"; done \
- | sed -e "s,^$libname$shrext\\\\.,," \
- | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
- | sed 1q ) 2>/dev/null`
- if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext.$ver"
- fi
- else
- eval library_names=\"$acl_library_names_spec\"
- for f in $library_names; do
- if test -f "$dir/$f"; then
- found_dir="$dir"
- found_so="$dir/$f"
- break
- fi
- done
- fi
+ found_so="$dir/lib$name.dll.a"
fi
- fi
- if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$acl_libext"; then
- found_dir="$dir"
- found_a="$dir/$libname.$acl_libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
fi
- fi
- if test "X$found_dir" != "X"; then
- if test -f "$dir/$libname.la"; then
- found_la="$dir/$libname.la"
+ else
+ if test -f "$dir/lib$name.$libext"; then
+ found_dir="$dir"
+ found_a="$dir/lib$name.$libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
fi
fi
;;
if test "X$found_dir" != "X"; then
LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name"
if test "X$found_so" != "X"; then
- if test "$enable_rpath" = no \
- || test "X$found_dir" = "X/usr/$acl_libdirstem" \
- || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
+ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/$acl_libdirstem"; then
LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
else
haveit=
if test -z "$haveit"; then
ltrpathdirs="$ltrpathdirs $found_dir"
fi
- if test "$acl_hardcode_direct" = yes; then
+ if test "$hardcode_direct" = yes; then
LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
else
- if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
haveit=
for x in $rpathdirs; do
if test -z "$haveit"; then
LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir"
fi
- if test "$acl_hardcode_minus_L" != no; then
+ if test "$hardcode_minus_L" != no; then
LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so"
else
LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name"
case "$found_dir" in
*/$acl_libdirstem | */$acl_libdirstem/)
basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
- if test "$name" = 'iconv'; then
- LIBICONV_PREFIX="$basedir"
- fi
- additional_includedir="$basedir/include"
- ;;
- */$acl_libdirstem2 | */$acl_libdirstem2/)
- basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
- if test "$name" = 'iconv'; then
- LIBICONV_PREFIX="$basedir"
- fi
additional_includedir="$basedir/include"
;;
esac
case "$dep" in
-L*)
additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
- if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
- && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
+ if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then
haveit=
- if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
- || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
+ if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then
if test -n "$GCC"; then
case $host_os in
linux* | gnu* | k*bsd*-gnu) haveit=yes;;
done
done
if test "X$rpathdirs" != "X"; then
- if test -n "$acl_hardcode_libdir_separator"; then
+ if test -n "$hardcode_libdir_separator"; then
alldirs=
for found_dir in $rpathdirs; do
- alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
done
acl_save_libdir="$libdir"
libdir="$alldirs"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
+ eval flag=\"$hardcode_libdir_flag_spec\"
libdir="$acl_save_libdir"
LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
else
for found_dir in $rpathdirs; do
acl_save_libdir="$libdir"
libdir="$found_dir"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
+ eval flag=\"$hardcode_libdir_flag_spec\"
libdir="$acl_save_libdir"
LIBICONV="${LIBICONV}${LIBICONV:+ }$flag"
done
-
-
-
-
-
-
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for CFPreferencesCopyAppValue" >&5
$as_echo_n "checking for CFPreferencesCopyAppValue... " >&6; }
if ${gt_cv_func_CFPreferencesCopyAppValue+:} false; then :
if test $gt_api_version -ge 3; then
- gt_revision_test_code='
+ gt_revision_test_code='[
#ifndef __GNU_GETTEXT_SUPPORTED_REVISION
#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1)
#endif
typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1];
-'
+]'
else
gt_revision_test_code=
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv" >&5
$as_echo "$am_cv_func_iconv" >&6; }
if test "$am_cv_func_iconv" = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for working iconv" >&5
-$as_echo_n "checking for working iconv... " >&6; }
-if ${am_cv_func_iconv_works+:} false; then :
- $as_echo_n "(cached) " >&6
-else
-
- am_save_LIBS="$LIBS"
- if test $am_cv_lib_iconv = yes; then
- LIBS="$LIBS $LIBICONV"
- fi
- if test "$cross_compiling" = yes; then :
- case "$host_os" in
- aix* | hpux*) am_cv_func_iconv_works="guessing no" ;;
- *) am_cv_func_iconv_works="guessing yes" ;;
- esac
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-#include <iconv.h>
-#include <string.h>
-int main ()
-{
- /* Test against AIX 5.1 bug: Failures are not distinguishable from successful
- returns. */
- {
- iconv_t cd_utf8_to_88591 = iconv_open ("ISO8859-1", "UTF-8");
- if (cd_utf8_to_88591 != (iconv_t)(-1))
- {
- static const char input[] = "\342\202\254"; /* EURO SIGN */
- char buf[10];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_utf8_to_88591,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if (res == 0)
- return 1;
- }
- }
- /* Test against Solaris 10 bug: Failures are not distinguishable from
- successful returns. */
- {
- iconv_t cd_ascii_to_88591 = iconv_open ("ISO8859-1", "646");
- if (cd_ascii_to_88591 != (iconv_t)(-1))
- {
- static const char input[] = "\263";
- char buf[10];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_ascii_to_88591,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if (res == 0)
- return 1;
- }
- }
-#if 0 /* This bug could be worked around by the caller. */
- /* Test against HP-UX 11.11 bug: Positive return value instead of 0. */
- {
- iconv_t cd_88591_to_utf8 = iconv_open ("utf8", "iso88591");
- if (cd_88591_to_utf8 != (iconv_t)(-1))
- {
- static const char input[] = "\304rger mit b\366sen B\374bchen ohne Augenma\337";
- char buf[50];
- const char *inptr = input;
- size_t inbytesleft = strlen (input);
- char *outptr = buf;
- size_t outbytesleft = sizeof (buf);
- size_t res = iconv (cd_88591_to_utf8,
- (char **) &inptr, &inbytesleft,
- &outptr, &outbytesleft);
- if ((int)res > 0)
- return 1;
- }
- }
-#endif
- /* Test against HP-UX 11.11 bug: No converter from EUC-JP to UTF-8 is
- provided. */
- if (/* Try standardized names. */
- iconv_open ("UTF-8", "EUC-JP") == (iconv_t)(-1)
- /* Try IRIX, OSF/1 names. */
- && iconv_open ("UTF-8", "eucJP") == (iconv_t)(-1)
- /* Try AIX names. */
- && iconv_open ("UTF-8", "IBM-eucJP") == (iconv_t)(-1)
- /* Try HP-UX names. */
- && iconv_open ("utf8", "eucJP") == (iconv_t)(-1))
- return 1;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- am_cv_func_iconv_works=yes
-else
- am_cv_func_iconv_works=no
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-fi
-
- LIBS="$am_save_LIBS"
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_func_iconv_works" >&5
-$as_echo "$am_cv_func_iconv_works" >&6; }
- case "$am_cv_func_iconv_works" in
- *no) am_func_iconv=no am_cv_lib_iconv=no ;;
- *) am_func_iconv=yes ;;
- esac
- else
- am_func_iconv=no am_cv_lib_iconv=no
- fi
- if test "$am_func_iconv" = yes; then
$as_echo "#define HAVE_ICONV 1" >>confdefs.h
-
-
-
-
use_additional=yes
acl_save_prefix="$prefix"
else
additional_includedir="$withval/include"
additional_libdir="$withval/$acl_libdirstem"
- if test "$acl_libdirstem2" != "$acl_libdirstem" \
- && ! test -d "$withval/$acl_libdirstem"; then
- additional_libdir="$withval/$acl_libdirstem2"
- fi
fi
fi
LIBINTL=
LTLIBINTL=
INCINTL=
- LIBINTL_PREFIX=
- HAVE_LIBINTL=
rpathdirs=
ltrpathdirs=
names_already_handled=
found_la=
found_so=
found_a=
- eval libname=\"$acl_libname_spec\" # typically: libname=lib$name
- if test -n "$acl_shlibext"; then
- shrext=".$acl_shlibext" # typically: shrext=.so
- else
- shrext=
- fi
if test $use_additional = yes; then
- dir="$additional_libdir"
- if test -n "$acl_shlibext"; then
- if test -f "$dir/$libname$shrext"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext"
+ if test -n "$shlibext" \
+ && { test -f "$additional_libdir/lib$name.$shlibext" \
+ || { test "$shlibext" = dll \
+ && test -f "$additional_libdir/lib$name.dll.a"; }; }; then
+ found_dir="$additional_libdir"
+ if test -f "$additional_libdir/lib$name.$shlibext"; then
+ found_so="$additional_libdir/lib$name.$shlibext"
else
- if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
- ver=`(cd "$dir" && \
- for f in "$libname$shrext".*; do echo "$f"; done \
- | sed -e "s,^$libname$shrext\\\\.,," \
- | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
- | sed 1q ) 2>/dev/null`
- if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext.$ver"
- fi
- else
- eval library_names=\"$acl_library_names_spec\"
- for f in $library_names; do
- if test -f "$dir/$f"; then
- found_dir="$dir"
- found_so="$dir/$f"
- break
- fi
- done
- fi
+ found_so="$additional_libdir/lib$name.dll.a"
fi
- fi
- if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$acl_libext"; then
- found_dir="$dir"
- found_a="$dir/$libname.$acl_libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
fi
- fi
- if test "X$found_dir" != "X"; then
- if test -f "$dir/$libname.la"; then
- found_la="$dir/$libname.la"
+ else
+ if test -f "$additional_libdir/lib$name.$libext"; then
+ found_dir="$additional_libdir"
+ found_a="$additional_libdir/lib$name.$libext"
+ if test -f "$additional_libdir/lib$name.la"; then
+ found_la="$additional_libdir/lib$name.la"
+ fi
fi
fi
fi
case "$x" in
-L*)
dir=`echo "X$x" | sed -e 's/^X-L//'`
- if test -n "$acl_shlibext"; then
- if test -f "$dir/$libname$shrext"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext"
+ if test -n "$shlibext" \
+ && { test -f "$dir/lib$name.$shlibext" \
+ || { test "$shlibext" = dll \
+ && test -f "$dir/lib$name.dll.a"; }; }; then
+ found_dir="$dir"
+ if test -f "$dir/lib$name.$shlibext"; then
+ found_so="$dir/lib$name.$shlibext"
else
- if test "$acl_library_names_spec" = '$libname$shrext$versuffix'; then
- ver=`(cd "$dir" && \
- for f in "$libname$shrext".*; do echo "$f"; done \
- | sed -e "s,^$libname$shrext\\\\.,," \
- | sort -t '.' -n -r -k1,1 -k2,2 -k3,3 -k4,4 -k5,5 \
- | sed 1q ) 2>/dev/null`
- if test -n "$ver" && test -f "$dir/$libname$shrext.$ver"; then
- found_dir="$dir"
- found_so="$dir/$libname$shrext.$ver"
- fi
- else
- eval library_names=\"$acl_library_names_spec\"
- for f in $library_names; do
- if test -f "$dir/$f"; then
- found_dir="$dir"
- found_so="$dir/$f"
- break
- fi
- done
- fi
+ found_so="$dir/lib$name.dll.a"
fi
- fi
- if test "X$found_dir" = "X"; then
- if test -f "$dir/$libname.$acl_libext"; then
- found_dir="$dir"
- found_a="$dir/$libname.$acl_libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
fi
- fi
- if test "X$found_dir" != "X"; then
- if test -f "$dir/$libname.la"; then
- found_la="$dir/$libname.la"
+ else
+ if test -f "$dir/lib$name.$libext"; then
+ found_dir="$dir"
+ found_a="$dir/lib$name.$libext"
+ if test -f "$dir/lib$name.la"; then
+ found_la="$dir/lib$name.la"
+ fi
fi
fi
;;
if test "X$found_dir" != "X"; then
LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name"
if test "X$found_so" != "X"; then
- if test "$enable_rpath" = no \
- || test "X$found_dir" = "X/usr/$acl_libdirstem" \
- || test "X$found_dir" = "X/usr/$acl_libdirstem2"; then
+ if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/$acl_libdirstem"; then
LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
else
haveit=
if test -z "$haveit"; then
ltrpathdirs="$ltrpathdirs $found_dir"
fi
- if test "$acl_hardcode_direct" = yes; then
+ if test "$hardcode_direct" = yes; then
LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
else
- if test -n "$acl_hardcode_libdir_flag_spec" && test "$acl_hardcode_minus_L" = no; then
+ if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then
LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
haveit=
for x in $rpathdirs; do
if test -z "$haveit"; then
LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir"
fi
- if test "$acl_hardcode_minus_L" != no; then
+ if test "$hardcode_minus_L" != no; then
LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so"
else
LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name"
case "$found_dir" in
*/$acl_libdirstem | */$acl_libdirstem/)
basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem/"'*$,,'`
- if test "$name" = 'intl'; then
- LIBINTL_PREFIX="$basedir"
- fi
- additional_includedir="$basedir/include"
- ;;
- */$acl_libdirstem2 | */$acl_libdirstem2/)
- basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e "s,/$acl_libdirstem2/"'*$,,'`
- if test "$name" = 'intl'; then
- LIBINTL_PREFIX="$basedir"
- fi
additional_includedir="$basedir/include"
;;
esac
case "$dep" in
-L*)
additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'`
- if test "X$additional_libdir" != "X/usr/$acl_libdirstem" \
- && test "X$additional_libdir" != "X/usr/$acl_libdirstem2"; then
+ if test "X$additional_libdir" != "X/usr/$acl_libdirstem"; then
haveit=
- if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem" \
- || test "X$additional_libdir" = "X/usr/local/$acl_libdirstem2"; then
+ if test "X$additional_libdir" = "X/usr/local/$acl_libdirstem"; then
if test -n "$GCC"; then
case $host_os in
linux* | gnu* | k*bsd*-gnu) haveit=yes;;
done
done
if test "X$rpathdirs" != "X"; then
- if test -n "$acl_hardcode_libdir_separator"; then
+ if test -n "$hardcode_libdir_separator"; then
alldirs=
for found_dir in $rpathdirs; do
- alldirs="${alldirs}${alldirs:+$acl_hardcode_libdir_separator}$found_dir"
+ alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir"
done
acl_save_libdir="$libdir"
libdir="$alldirs"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
+ eval flag=\"$hardcode_libdir_flag_spec\"
libdir="$acl_save_libdir"
LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
else
for found_dir in $rpathdirs; do
acl_save_libdir="$libdir"
libdir="$found_dir"
- eval flag=\"$acl_hardcode_libdir_flag_spec\"
+ eval flag=\"$hardcode_libdir_flag_spec\"
libdir="$acl_save_libdir"
LIBINTL="${LIBINTL}${LIBINTL:+ }$flag"
done
done
fi
-
-
-
-
-
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU gettext in libintl" >&5
$as_echo_n "checking for GNU gettext in libintl... " >&6; }
if eval \${$gt_func_gnugettext_libintl+:} false; then :
-############### common
-
-# Checks sensors, required by psensor and psensor-server
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sensors_init in -lsensors" >&5
-$as_echo_n "checking for sensors_init in -lsensors... " >&6; }
-if ${ac_cv_lib_sensors_sensors_init+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsensors $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char sensors_init ();
-int
-main ()
-{
-return sensors_init ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_sensors_sensors_init=yes
-else
- ac_cv_lib_sensors_sensors_init=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_sensors_sensors_init" >&5
-$as_echo "$ac_cv_lib_sensors_sensors_init" >&6; }
-if test "x$ac_cv_lib_sensors_sensors_init" = xyes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBSENSORS 1
-_ACEOF
-
- LIBS="-lsensors $LIBS"
-
-fi
+# Gsettings
-for ac_header in sensors/sensors.h sensors/errors.h
-do :
- as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
- cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
+ # Check whether --enable-schemas-compile was given.
+if test "${enable_schemas_compile+set}" = set; then :
+ enableval=$enable_schemas_compile; case ${enableval} in
+ yes) GSETTINGS_DISABLE_SCHEMAS_COMPILE="" ;;
+ no) GSETTINGS_DISABLE_SCHEMAS_COMPILE="1" ;;
+ *) as_fn_error $? "bad value ${enableval} for --enable-schemas-compile" "$LINENO" 5 ;;
+ esac
fi
-done
-
-SENSORS_LIBS=-lsensors
-
-
-############### psensor
-
-### Required
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
if test -n "$PKG_CONFIG"; then
- _pkg_min_version=0.9.0
+ _pkg_min_version=0.16
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking pkg-config is at least version $_pkg_min_version" >&5
$as_echo_n "checking pkg-config is at least version $_pkg_min_version... " >&6; }
if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
PKG_CONFIG=""
fi
fi
+ gsettingsschemadir=${datadir}/glib-2.0/schemas
+
+ if test x$cross_compiling != xyes; then
+ GLIB_COMPILE_SCHEMAS=`$PKG_CONFIG --variable glib_compile_schemas gio-2.0`
+ else
+ # Extract the first word of "glib-compile-schemas", so it can be a program name with args.
+set dummy glib-compile-schemas; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_path_GLIB_COMPILE_SCHEMAS+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $GLIB_COMPILE_SCHEMAS in
+ [\\/]* | ?:[\\/]*)
+ ac_cv_path_GLIB_COMPILE_SCHEMAS="$GLIB_COMPILE_SCHEMAS" # Let the user override the test with a path.
+ ;;
+ *)
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_path_GLIB_COMPILE_SCHEMAS="$as_dir/$ac_word$ac_exec_ext"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+fi
+GLIB_COMPILE_SCHEMAS=$ac_cv_path_GLIB_COMPILE_SCHEMAS
+if test -n "$GLIB_COMPILE_SCHEMAS"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GLIB_COMPILE_SCHEMAS" >&5
+$as_echo "$GLIB_COMPILE_SCHEMAS" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+
+ if test "x$GLIB_COMPILE_SCHEMAS" = "x"; then
+ as_fn_error $? "glib-compile-schemas not found." "$LINENO" 5
+ else
+ :
+ fi
+
+ GSETTINGS_RULES='
+.PHONY : uninstall-gsettings-schemas install-gsettings-schemas clean-gsettings-schemas
+
+mostlyclean-am: clean-gsettings-schemas
+
+gsettings__enum_file = $(addsuffix .enums.xml,$(gsettings_ENUM_NAMESPACE))
+
+%.gschema.valid: %.gschema.xml $(gsettings__enum_file)
+ $(AM_V_GEN) $(GLIB_COMPILE_SCHEMAS) --strict --dry-run $(addprefix --schema-file=,$(gsettings__enum_file)) --schema-file=$< && mkdir -p $(@D) && touch $@
+
+all-am: $(gsettings_SCHEMAS:.xml=.valid)
+uninstall-am: uninstall-gsettings-schemas
+install-data-am: install-gsettings-schemas
+
+.SECONDARY: $(gsettings_SCHEMAS)
+
+install-gsettings-schemas: $(gsettings_SCHEMAS) $(gsettings__enum_file)
+ @$(NORMAL_INSTALL)
+ if test -n "$^"; then \
+ test -z "$(gsettingsschemadir)" || $(MKDIR_P) "$(DESTDIR)$(gsettingsschemadir)"; \
+ $(INSTALL_DATA) $^ "$(DESTDIR)$(gsettingsschemadir)"; \
+ test -n "$(GSETTINGS_DISABLE_SCHEMAS_COMPILE)$(DESTDIR)" || $(GLIB_COMPILE_SCHEMAS) $(gsettingsschemadir); \
+ fi
+
+uninstall-gsettings-schemas:
+ @$(NORMAL_UNINSTALL)
+ @list='\''$(gsettings_SCHEMAS) $(gsettings__enum_file)'\''; test -n "$(gsettingsschemadir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e '\''s|^.*/||'\''`; \
+ test -n "$$files" || exit 0; \
+ echo " ( cd '\''$(DESTDIR)$(gsettingsschemadir)'\'' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(gsettingsschemadir)" && rm -f $$files
+ test -n "$(GSETTINGS_DISABLE_SCHEMAS_COMPILE)$(DESTDIR)" || $(GLIB_COMPILE_SCHEMAS) $(gsettingsschemadir)
+
+clean-gsettings-schemas:
+ rm -f $(gsettings_SCHEMAS:.xml=.valid) $(gsettings__enum_file)
+
+ifdef gsettings_ENUM_NAMESPACE
+$(gsettings__enum_file): $(gsettings_ENUM_FILES)
+ $(AM_V_GEN) glib-mkenums --comments '\''<!-- @comment@ -->'\'' --fhead "<schemalist>" --vhead " <@type@ id='\''$(gsettings_ENUM_NAMESPACE).@EnumName@'\''>" --vprod " <value nick='\''@valuenick@'\'' value='\''@valuenum@'\''/>" --vtail " </@type@>" --ftail "</schemalist>" $^ > $@.tmp && mv $@.tmp $@
+endif
+'
+
+
+
+
+
+
+
+############### common
+
+# Checks pthread
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_create in -lpthread" >&5
+$as_echo_n "checking for pthread_create in -lpthread... " >&6; }
+if ${ac_cv_lib_pthread_pthread_create+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lpthread $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char pthread_create ();
+int
+main ()
+{
+return pthread_create ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_pthread_pthread_create=yes
+else
+ ac_cv_lib_pthread_pthread_create=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pthread_pthread_create" >&5
+$as_echo "$ac_cv_lib_pthread_pthread_create" >&6; }
+if test "x$ac_cv_lib_pthread_pthread_create" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBPTHREAD 1
+_ACEOF
+
+ LIBS="-lpthread $LIBS"
+
+fi
+
+PTHREAD_LIBS=-pthread
+
+
+# Checks sensors, required by psensor and psensor-server
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sensors_init in -lsensors" >&5
+$as_echo_n "checking for sensors_init in -lsensors... " >&6; }
+if ${ac_cv_lib_sensors_sensors_init+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsensors $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char sensors_init ();
+int
+main ()
+{
+return sensors_init ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_sensors_sensors_init=yes
+else
+ ac_cv_lib_sensors_sensors_init=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_sensors_sensors_init" >&5
+$as_echo "$ac_cv_lib_sensors_sensors_init" >&6; }
+if test "x$ac_cv_lib_sensors_sensors_init" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBSENSORS 1
+_ACEOF
+
+ LIBS="-lsensors $LIBS"
+
+fi
+
+for ac_header in sensors/sensors.h sensors/error.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+SENSORS_LIBS=-lsensors
+
+
+############### psensor
+
+### Required
+
pkg_failed=no
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for X11" >&5
# Put the nasty error message in config.log where it belongs
echo "$X11_PKG_ERRORS" >&5
- as_fn_error $? "Package requirements (x11) were not met:
-
-$X11_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-Alternatively, you may set the environment variables X11_CFLAGS
-and X11_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details." "$LINENO" 5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"x11 missing psensor will not be built\"" >&5
+$as_echo "$as_me: WARNING: \"x11 missing psensor will not be built\"" >&2;}
elif test $pkg_failed = untried; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables X11_CFLAGS
-and X11_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details" "$LINENO" 5; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"x11 missing psensor will not be built\"" >&5
+$as_echo "$as_me: WARNING: \"x11 missing psensor will not be built\"" >&2;}
else
X11_CFLAGS=$pkg_cv_X11_CFLAGS
X11_LIBS=$pkg_cv_X11_LIBS
$as_echo "yes" >&6; }
fi
+ if test -n "$X11_LIBS"; then
+ X11_TRUE=
+ X11_FALSE='#'
+else
+ X11_TRUE='#'
+ X11_FALSE=
+fi
+
# Put the nasty error message in config.log where it belongs
echo "$XEXT_PKG_ERRORS" >&5
- as_fn_error $? "Package requirements (xext) were not met:
-
-$XEXT_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-Alternatively, you may set the environment variables XEXT_CFLAGS
-and XEXT_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details." "$LINENO" 5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"xext missing psensor will not be built\"" >&5
+$as_echo "$as_me: WARNING: \"xext missing psensor will not be built\"" >&2;}
elif test $pkg_failed = untried; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables XEXT_CFLAGS
-and XEXT_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details" "$LINENO" 5; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"xext missing psensor will not be built\"" >&5
+$as_echo "$as_me: WARNING: \"xext missing psensor will not be built\"" >&2;}
else
XEXT_CFLAGS=$pkg_cv_XEXT_CFLAGS
XEXT_LIBS=$pkg_cv_XEXT_LIBS
$as_echo "yes" >&6; }
fi
+ if test -n "$XEXT_LIBS"; then
+ XEXT_TRUE=
+ XEXT_FALSE='#'
+else
+ XEXT_TRUE='#'
+ XEXT_FALSE=
+fi
+
-# Checks GTK
-GTK_LIBS=
+# Checks GTK+ 3.0
pkg_failed=no
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GTK" >&5
pkg_cv_GTK_CFLAGS="$GTK_CFLAGS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gtk+-3.0\""; } >&5
- ($PKG_CONFIG --exists --print-errors "gtk+-3.0") 2>&5
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gtk+-3.0 >= 3.4\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "gtk+-3.0 >= 3.4") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- pkg_cv_GTK_CFLAGS=`$PKG_CONFIG --cflags "gtk+-3.0" 2>/dev/null`
+ pkg_cv_GTK_CFLAGS=`$PKG_CONFIG --cflags "gtk+-3.0 >= 3.4" 2>/dev/null`
test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
pkg_cv_GTK_LIBS="$GTK_LIBS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gtk+-3.0\""; } >&5
- ($PKG_CONFIG --exists --print-errors "gtk+-3.0") 2>&5
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gtk+-3.0 >= 3.4\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "gtk+-3.0 >= 3.4") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- pkg_cv_GTK_LIBS=`$PKG_CONFIG --libs "gtk+-3.0" 2>/dev/null`
+ pkg_cv_GTK_LIBS=`$PKG_CONFIG --libs "gtk+-3.0 >= 3.4" 2>/dev/null`
test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
- GTK_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "gtk+-3.0" 2>&1`
+ GTK_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "gtk+-3.0 >= 3.4" 2>&1`
else
- GTK_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "gtk+-3.0" 2>&1`
+ GTK_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "gtk+-3.0 >= 3.4" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$GTK_PKG_ERRORS" >&5
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"GTK+ 3 not present\"" >&5
-$as_echo "$as_me: WARNING: \"GTK+ 3 not present\"" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"gtk missing psensor will not be built\"" >&5
+$as_echo "$as_me: WARNING: \"gtk missing psensor will not be built\"" >&2;}
elif test $pkg_failed = untried; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"GTK+ 3 not present\"" >&5
-$as_echo "$as_me: WARNING: \"GTK+ 3 not present\"" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"gtk missing psensor will not be built\"" >&5
+$as_echo "$as_me: WARNING: \"gtk missing psensor will not be built\"" >&2;}
else
GTK_CFLAGS=$pkg_cv_GTK_CFLAGS
GTK_LIBS=$pkg_cv_GTK_LIBS
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
-$as_echo "#define HAVE_GTK3 1" >>confdefs.h
-
fi
if test -n "$GTK_LIBS"; then
GTK_TRUE=
GTK_FALSE=
fi
+# ensure that only allowed headers are included
+GTK_CFLAGS+=" -DGTK_DISABLE_SINGLE_INCLUDES "
+# ensure that no gtk deprecated symbols are used
+GTK_CFLAGS+=" -DGDK_DISABLE_DEPRECATED "
+GTK_CFLAGS+=" -DGTK_DISABLE_DEPRECATED "
+# ensure use of accessors
+GTK_CFLAGS+=" -DGSEAL_ENABLE "
+
+# udisks2
-if test "$GTK_LIBS" == ""; then
pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GTK" >&5
-$as_echo_n "checking for GTK... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for LIBUDISKS2" >&5
+$as_echo_n "checking for LIBUDISKS2... " >&6; }
-if test -n "$GTK_CFLAGS"; then
- pkg_cv_GTK_CFLAGS="$GTK_CFLAGS"
+if test -n "$LIBUDISKS2_CFLAGS"; then
+ pkg_cv_LIBUDISKS2_CFLAGS="$LIBUDISKS2_CFLAGS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gtk+-2.0 >= 2.18\""; } >&5
- ($PKG_CONFIG --exists --print-errors "gtk+-2.0 >= 2.18") 2>&5
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"udisks2\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "udisks2") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- pkg_cv_GTK_CFLAGS=`$PKG_CONFIG --cflags "gtk+-2.0 >= 2.18" 2>/dev/null`
+ pkg_cv_LIBUDISKS2_CFLAGS=`$PKG_CONFIG --cflags "udisks2" 2>/dev/null`
test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
else
pkg_failed=untried
fi
-if test -n "$GTK_LIBS"; then
- pkg_cv_GTK_LIBS="$GTK_LIBS"
+if test -n "$LIBUDISKS2_LIBS"; then
+ pkg_cv_LIBUDISKS2_LIBS="$LIBUDISKS2_LIBS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gtk+-2.0 >= 2.18\""; } >&5
- ($PKG_CONFIG --exists --print-errors "gtk+-2.0 >= 2.18") 2>&5
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"udisks2\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "udisks2") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- pkg_cv_GTK_LIBS=`$PKG_CONFIG --libs "gtk+-2.0 >= 2.18" 2>/dev/null`
+ pkg_cv_LIBUDISKS2_LIBS=`$PKG_CONFIG --libs "udisks2" 2>/dev/null`
test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
- GTK_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "gtk+-2.0 >= 2.18" 2>&1`
+ LIBUDISKS2_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "udisks2" 2>&1`
else
- GTK_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "gtk+-2.0 >= 2.18" 2>&1`
+ LIBUDISKS2_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "udisks2" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
- echo "$GTK_PKG_ERRORS" >&5
-
- as_fn_error $? "Package requirements (gtk+-2.0 >= 2.18) were not met:
-
-$GTK_PKG_ERRORS
-
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
+ echo "$LIBUDISKS2_PKG_ERRORS" >&5
-Alternatively, you may set the environment variables GTK_CFLAGS
-and GTK_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details." "$LINENO" 5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"Library udisks2 not present\"" >&5
+$as_echo "$as_me: WARNING: \"Library udisks2 not present\"" >&2;}
elif test $pkg_failed = untried; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables GTK_CFLAGS
-and GTK_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details" "$LINENO" 5; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"Library udisks2 not present\"" >&5
+$as_echo "$as_me: WARNING: \"Library udisks2 not present\"" >&2;}
else
- GTK_CFLAGS=$pkg_cv_GTK_CFLAGS
- GTK_LIBS=$pkg_cv_GTK_LIBS
+ LIBUDISKS2_CFLAGS=$pkg_cv_LIBUDISKS2_CFLAGS
+ LIBUDISKS2_LIBS=$pkg_cv_LIBUDISKS2_LIBS
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
+$as_echo "#define HAVE_LIBUDISKS2 1" >>confdefs.h
+
fi
- if test -n "$GTK_LIBS"; then
- GTK_TRUE=
- GTK_FALSE='#'
+ if test -n "$LIBUDISKS2_LIBS"; then
+ LIBUDISKS2_TRUE=
+ LIBUDISKS2_FALSE='#'
else
- GTK_TRUE='#'
- GTK_FALSE=
+ LIBUDISKS2_TRUE='#'
+ LIBUDISKS2_FALSE=
fi
-fi
-# Check GCONF
+# check libatasmart
pkg_failed=no
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GCONF" >&5
-$as_echo_n "checking for GCONF... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ATASMART" >&5
+$as_echo_n "checking for ATASMART... " >&6; }
-if test -n "$GCONF_CFLAGS"; then
- pkg_cv_GCONF_CFLAGS="$GCONF_CFLAGS"
+if test -n "$ATASMART_CFLAGS"; then
+ pkg_cv_ATASMART_CFLAGS="$ATASMART_CFLAGS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gconf-2.0\""; } >&5
- ($PKG_CONFIG --exists --print-errors "gconf-2.0") 2>&5
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libatasmart\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "libatasmart") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- pkg_cv_GCONF_CFLAGS=`$PKG_CONFIG --cflags "gconf-2.0" 2>/dev/null`
+ pkg_cv_ATASMART_CFLAGS=`$PKG_CONFIG --cflags "libatasmart" 2>/dev/null`
test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
else
pkg_failed=untried
fi
-if test -n "$GCONF_LIBS"; then
- pkg_cv_GCONF_LIBS="$GCONF_LIBS"
+if test -n "$ATASMART_LIBS"; then
+ pkg_cv_ATASMART_LIBS="$ATASMART_LIBS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"gconf-2.0\""; } >&5
- ($PKG_CONFIG --exists --print-errors "gconf-2.0") 2>&5
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"libatasmart\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "libatasmart") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- pkg_cv_GCONF_LIBS=`$PKG_CONFIG --libs "gconf-2.0" 2>/dev/null`
+ pkg_cv_ATASMART_LIBS=`$PKG_CONFIG --libs "libatasmart" 2>/dev/null`
test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
- GCONF_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "gconf-2.0" 2>&1`
+ ATASMART_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "libatasmart" 2>&1`
else
- GCONF_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "gconf-2.0" 2>&1`
+ ATASMART_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "libatasmart" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
- echo "$GCONF_PKG_ERRORS" >&5
-
- as_fn_error $? "Package requirements (gconf-2.0) were not met:
-
-$GCONF_PKG_ERRORS
+ echo "$ATASMART_PKG_ERRORS" >&5
-Consider adjusting the PKG_CONFIG_PATH environment variable if you
-installed software in a non-standard prefix.
-
-Alternatively, you may set the environment variables GCONF_CFLAGS
-and GCONF_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details." "$LINENO" 5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"Library atasmart not present\"" >&5
+$as_echo "$as_me: WARNING: \"Library atasmart not present\"" >&2;}
elif test $pkg_failed = untried; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error $? "The pkg-config script could not be found or is too old. Make sure it
-is in your PATH or set the PKG_CONFIG environment variable to the full
-path to pkg-config.
-
-Alternatively, you may set the environment variables GCONF_CFLAGS
-and GCONF_LIBS to avoid the need to call pkg-config.
-See the pkg-config man page for more details.
-
-To get pkg-config, see <http://pkg-config.freedesktop.org/>.
-See \`config.log' for more details" "$LINENO" 5; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"Library atasmart not present\"" >&5
+$as_echo "$as_me: WARNING: \"Library atasmart not present\"" >&2;}
else
- GCONF_CFLAGS=$pkg_cv_GCONF_CFLAGS
- GCONF_LIBS=$pkg_cv_GCONF_LIBS
+ ATASMART_CFLAGS=$pkg_cv_ATASMART_CFLAGS
+ ATASMART_LIBS=$pkg_cv_ATASMART_LIBS
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
+$as_echo "#define HAVE_ATASMART 1" >>confdefs.h
+
+fi
+
+ if test -n "$ATASMART_LIBS"; then
+ ATASMART_TRUE=
+ ATASMART_FALSE='#'
+else
+ ATASMART_TRUE='#'
+ ATASMART_FALSE=
fi
-### Optional
# Check libnotify
LIBNOTIFY_LIBS=
pkg_cv_JSON_CFLAGS="$JSON_CFLAGS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"json\""; } >&5
- ($PKG_CONFIG --exists --print-errors "json") 2>&5
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"json-c >= 0.11.99\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "json-c >= 0.11.99") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- pkg_cv_JSON_CFLAGS=`$PKG_CONFIG --cflags "json" 2>/dev/null`
+ pkg_cv_JSON_CFLAGS=`$PKG_CONFIG --cflags "json-c >= 0.11.99" 2>/dev/null`
test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
pkg_cv_JSON_LIBS="$JSON_LIBS"
elif test -n "$PKG_CONFIG"; then
if test -n "$PKG_CONFIG" && \
- { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"json\""; } >&5
- ($PKG_CONFIG --exists --print-errors "json") 2>&5
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"json-c >= 0.11.99\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "json-c >= 0.11.99") 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- pkg_cv_JSON_LIBS=`$PKG_CONFIG --libs "json" 2>/dev/null`
+ pkg_cv_JSON_LIBS=`$PKG_CONFIG --libs "json-c >= 0.11.99" 2>/dev/null`
test "x$?" != "x0" && pkg_failed=yes
else
pkg_failed=yes
_pkg_short_errors_supported=no
fi
if test $_pkg_short_errors_supported = yes; then
- JSON_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "json" 2>&1`
+ JSON_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "json-c >= 0.11.99" 2>&1`
else
- JSON_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "json" 2>&1`
+ JSON_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "json-c >= 0.11.99" 2>&1`
fi
# Put the nasty error message in config.log where it belongs
echo "$JSON_PKG_ERRORS" >&5
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"Remote monitoring disabled" >&5
-$as_echo "$as_me: WARNING: \"Remote monitoring disabled" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"json-c missing\"" >&5
+$as_echo "$as_me: WARNING: \"json-c missing\"" >&2;}
elif test $pkg_failed = untried; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"Remote monitoring disabled" >&5
-$as_echo "$as_me: WARNING: \"Remote monitoring disabled" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"json-c missing\"" >&5
+$as_echo "$as_me: WARNING: \"json-c missing\"" >&2;}
+else
+ JSON_CFLAGS=$pkg_cv_JSON_CFLAGS
+ JSON_LIBS=$pkg_cv_JSON_LIBS
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+
+$as_echo "#define HAVE_JSON 1" >>confdefs.h
+
+fi
+
+if test "$JSON_LIBS" == ""; then
+
+pkg_failed=no
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for JSON" >&5
+$as_echo_n "checking for JSON... " >&6; }
+
+if test -n "$JSON_CFLAGS"; then
+ pkg_cv_JSON_CFLAGS="$JSON_CFLAGS"
+ elif test -n "$PKG_CONFIG"; then
+ if test -n "$PKG_CONFIG" && \
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"json >= 0.11.99\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "json >= 0.11.99") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ pkg_cv_JSON_CFLAGS=`$PKG_CONFIG --cflags "json >= 0.11.99" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
+else
+ pkg_failed=yes
+fi
+ else
+ pkg_failed=untried
+fi
+if test -n "$JSON_LIBS"; then
+ pkg_cv_JSON_LIBS="$JSON_LIBS"
+ elif test -n "$PKG_CONFIG"; then
+ if test -n "$PKG_CONFIG" && \
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: \$PKG_CONFIG --exists --print-errors \"json >= 0.11.99\""; } >&5
+ ($PKG_CONFIG --exists --print-errors "json >= 0.11.99") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ pkg_cv_JSON_LIBS=`$PKG_CONFIG --libs "json >= 0.11.99" 2>/dev/null`
+ test "x$?" != "x0" && pkg_failed=yes
+else
+ pkg_failed=yes
+fi
+ else
+ pkg_failed=untried
+fi
+
+
+
+if test $pkg_failed = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then
+ _pkg_short_errors_supported=yes
+else
+ _pkg_short_errors_supported=no
+fi
+ if test $_pkg_short_errors_supported = yes; then
+ JSON_PKG_ERRORS=`$PKG_CONFIG --short-errors --print-errors --cflags --libs "json >= 0.11.99" 2>&1`
+ else
+ JSON_PKG_ERRORS=`$PKG_CONFIG --print-errors --cflags --libs "json >= 0.11.99" 2>&1`
+ fi
+ # Put the nasty error message in config.log where it belongs
+ echo "$JSON_PKG_ERRORS" >&5
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"json0 missing\"" >&5
+$as_echo "$as_me: WARNING: \"json0 missing\"" >&2;}
+elif test $pkg_failed = untried; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \"json0 missing\"" >&5
+$as_echo "$as_me: WARNING: \"json0 missing\"" >&2;}
else
JSON_CFLAGS=$pkg_cv_JSON_CFLAGS
JSON_LIBS=$pkg_cv_JSON_LIBS
$as_echo "#define HAVE_JSON 1" >>confdefs.h
+
+$as_echo "#define HAVE_JSON_0 1" >>confdefs.h
+
fi
+fi
+
if test -n "$JSON_LIBS"; then
JSON_TRUE=
JSON_FALSE='#'
-ac_config_files="$ac_config_files Makefile src/Makefile src/glade/Makefile src/lib/Makefile src/server/Makefile icons/hicolor/scalable/Makefile icons/hicolor/14x14/Makefile icons/hicolor/16x16/Makefile icons/hicolor/22x22/Makefile icons/hicolor/24x24/Makefile icons/hicolor/32x32/Makefile icons/hicolor/48x48/Makefile icons/hicolor/64x64/Makefile icons/ubuntu-mono-dark/status/22/Makefile icons/ubuntu-mono-light/status/22/Makefile icons/ubuntu-mono-dark/apps/22/Makefile www/Makefile po/Makefile.in tests/Makefile"
+ac_config_files="$ac_config_files Makefile doc/Makefile src/Makefile src/glade/Makefile src/lib/Makefile src/server/Makefile icons/hicolor/scalable/Makefile icons/hicolor/14x14/Makefile icons/hicolor/16x16/Makefile icons/hicolor/22x22/Makefile icons/hicolor/24x24/Makefile icons/hicolor/32x32/Makefile icons/hicolor/48x48/Makefile icons/hicolor/64x64/Makefile icons/ubuntu-mono-dark/status/22/Makefile icons/ubuntu-mono-light/status/22/Makefile icons/ubuntu-mono-dark/apps/22/Makefile www/Makefile po/Makefile.in tests/Makefile"
for ac_prog in help2man
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
- if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
ac_cv_prog_HELP2MAN="$ac_prog"
$as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
done
+# Extract the first word of "asciidoc", so it can be a program name with args.
+set dummy asciidoc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ASCIIDOC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ASCIIDOC"; then
+ ac_cv_prog_ASCIIDOC="$ASCIIDOC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ASCIIDOC="yes"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ASCIIDOC=$ac_cv_prog_ASCIIDOC
+if test -n "$ASCIIDOC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ASCIIDOC" >&5
+$as_echo "$ASCIIDOC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ if test -n "$ASCIIDOC"; then
+ ASCIIDOC_TRUE=
+ ASCIIDOC_FALSE='#'
+else
+ ASCIIDOC_TRUE='#'
+ ASCIIDOC_FALSE=
+fi
+
+
+# Extract the first word of "cppcheck", so it can be a program name with args.
+set dummy cppcheck; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_HAVE_CPPCHECK+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$HAVE_CPPCHECK"; then
+ ac_cv_prog_HAVE_CPPCHECK="$HAVE_CPPCHECK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_HAVE_CPPCHECK="yes"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+HAVE_CPPCHECK=$ac_cv_prog_HAVE_CPPCHECK
+if test -n "$HAVE_CPPCHECK"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $HAVE_CPPCHECK" >&5
+$as_echo "$HAVE_CPPCHECK" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ if test -n "$HAVE_CPPCHECK"; then
+ CPPCHECK_TRUE=
+ CPPCHECK_FALSE='#'
+else
+ CPPCHECK_TRUE='#'
+ CPPCHECK_FALSE=
+fi
+
+
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
LTLIBOBJS=$ac_ltlibobjs
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
+$as_echo_n "checking that generated files are newer than configure... " >&6; }
+ if test -n "$am_sleep_pid"; then
+ # Hide warnings about reused PIDs.
+ wait $am_sleep_pid 2>/dev/null
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
+$as_echo "done" >&6; }
if test -n "$EXEEXT"; then
am__EXEEXT_TRUE=
am__EXEEXT_FALSE='#'
as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
-if test -z "${GTK_TRUE}" && test -z "${GTK_FALSE}"; then
- as_fn_error $? "conditional \"GTK\" was never defined.
+if test -z "${X11_TRUE}" && test -z "${X11_FALSE}"; then
+ as_fn_error $? "conditional \"X11\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${XEXT_TRUE}" && test -z "${XEXT_FALSE}"; then
+ as_fn_error $? "conditional \"XEXT\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
if test -z "${GTK_TRUE}" && test -z "${GTK_FALSE}"; then
as_fn_error $? "conditional \"GTK\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
+if test -z "${LIBUDISKS2_TRUE}" && test -z "${LIBUDISKS2_FALSE}"; then
+ as_fn_error $? "conditional \"LIBUDISKS2\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${ATASMART_TRUE}" && test -z "${ATASMART_FALSE}"; then
+ as_fn_error $? "conditional \"ATASMART\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
if test -z "${LIBNOTIFY_TRUE}" && test -z "${LIBNOTIFY_FALSE}"; then
as_fn_error $? "conditional \"LIBNOTIFY\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
as_fn_error $? "conditional \"GTOP\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
+if test -z "${ASCIIDOC_TRUE}" && test -z "${ASCIIDOC_FALSE}"; then
+ as_fn_error $? "conditional \"ASCIIDOC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${CPPCHECK_TRUE}" && test -z "${CPPCHECK_FALSE}"; then
+ as_fn_error $? "conditional \"CPPCHECK\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
: "${CONFIG_STATUS=./config.status}"
ac_write_fail=0
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
- # In both cases, we have to default to `cp -p'.
+ # In both cases, we have to default to `cp -pR'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
fi
else
- as_ln_s='cp -p'
+ as_ln_s='cp -pR'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
as_mkdir_p=false
fi
-if test -x / >/dev/null 2>&1; then
- as_test_x='test -x'
-else
- if ls -dL / >/dev/null 2>&1; then
- as_ls_L_option=L
- else
- as_ls_L_option=
- fi
- as_test_x='
- eval sh -c '\''
- if test -d "$1"; then
- test -d "$1/.";
- else
- case $1 in #(
- -*)set "./$1";;
- esac;
- case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
- ???[sx]*):;;*)false;;esac;fi
- '\'' sh
- '
-fi
-as_executable_p=$as_test_x
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by psensor $as_me 0.6.2.15, which was
-generated by GNU Autoconf 2.68. Invocation command line was
+This file was extended by psensor $as_me 1.1.0.x, which was
+generated by GNU Autoconf 2.69. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
-psensor config.status 0.6.2.15
-configured by $0, generated by GNU Autoconf 2.68,
+psensor config.status 1.1.0.x
+configured by $0, generated by GNU Autoconf 2.69,
with options \\"\$ac_cs_config\\"
-Copyright (C) 2010 Free Software Foundation, Inc.
+Copyright (C) 2012 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
if \$ac_cs_recheck; then
- set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
shift
\$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
CONFIG_SHELL='$SHELL'
"depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
"po-directories") CONFIG_COMMANDS="$CONFIG_COMMANDS po-directories" ;;
"Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+ "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
"src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
"src/glade/Makefile") CONFIG_FILES="$CONFIG_FILES src/glade/Makefile" ;;
"src/lib/Makefile") CONFIG_FILES="$CONFIG_FILES src/lib/Makefile" ;;
case $ac_file$ac_mode in
"depfiles":C) test x"$AMDEP_TRUE" != x"" || {
- # Autoconf 2.62 quotes --file arguments for eval, but not when files
+ # Older Autoconf quotes --file arguments for eval, but not when files
# are listed without --file. Let's play safe and only enable the eval
# if we detect the quoting.
case $CONFIG_FILES in
# Strip MF so we end up with the name of the file.
mf=`echo "$mf" | sed -e 's/:.*$//'`
# Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named `Makefile.in', but
+ # We used to match only the files named 'Makefile.in', but
# some people rename them; so instead we look at the file content.
# Grep'ing the first line is not enough: some people post-process
# each Makefile.in and add a new line on top of each file to say so.
continue
fi
# Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running `make'.
+ # from the Makefile without running 'make'.
DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
test -z "$DEPDIR" && continue
am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "am__include" && continue
+ test -z "$am__include" && continue
am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n 's/^U = //p' < "$mf"`
# Find all dependency output files, they are included files with
# $(DEPDIR) in their names. We invoke sed twice because it is the
# simplest approach to changing $(DEPDIR) to its actual value in the
# expansion.
for file in `sed -n "
s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
# Make sure the directory exists.
test -f "$dirpart/$file" && continue
fdir=`$as_dirname -- "$file" ||